#26 Is this a pppd problem?

[Anonymous]

Hello
Am suffering with this. I run RH7 with a newly installed
2.4.16 kernel. pppoatm patches not needed so far as I can tell.
Sarlib etc all done as per howto at linux-usb. Install pppd 2.4.0-2
using rpm when I plug in modem and start up pppd, I see this in
/var/log/messages and the first few lines in the
terminal.

Dec 20 00:56:57 jimsdesktop pppd[891]: Plugin
/usr/lib/pppd/plugins/pppoatm.so loaded.
Dec 20 00:56:57
jimsdesktop pppd[891]: PPPoATM plugin_init
Dec 20 00:56:57
jimsdesktop pppd[891]: PPPoATM setdevname_pppoatm
Dec 20
00:56:57 jimsdesktop pppd[891]: PPPoATM setdevname_pppoatm -
SUCCESS
Dec 20 00:56:57 jimsdesktop pppd[892]: pppd 2.4.0b1
started by root, uid 0
Dec 20 00:56:57 jimsdesktop pppd[892]:
Using interface ppp0
Dec 20 00:56:57 jimsdesktop pppd[892]:
Connect: ppp0 <--> 0.38
Dec 20 00:56:57 jimsdesktop
/etc/hotplug/net.agent: assuming ppp0 is already up
Dec 20
00:57:27 jimsdesktop pppd[892]: LCP: timeout sending Config-
Requests

The speedmgmt module shows the following
errors...

usb_control/bulk_msg: timeout
usbdevfs:
USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
preceding
(timeout) error messages are normal
usb_control/bulk_msg:
timeout
Modem initialised at 544kbit/s downstream and
288kbit/s upstream

The modem lights come on properly, but
pppd clearly timesout the connection.
So I installed pppd-
2.4.0b2 using rpm. Now I see nothing in the terminal, but same
messages in logfile.
The config files are as per the howtos, my
vpi/vci is 1.50, my username/password are as for my previous
dialup

My interpretation is that this is a ppp problem, usb and
the modem itself seem to work. I've searched the net without
success, basically says this error is due to pppd config, but
everything seems to be right.

Do you have any
suggestions??

Jim
Butler
jim@no42strathmore.karoo.co.uk

Just noticed the
logfile is with beta2 pppd, but messages are the same.

[Nobody/Anonymous]

Logged In: NO

The log file also has 0.38 as vpi/vci, put in to config in desparation I
suppose! I DO have 1.50 in my config.

[Nobody/Anonymous]

Logged In: NO

Sorry logfile shows wrong vpi/vci, I do have the correct ones in config, I
put 0.38 in as a desparate gesture!!!