This would require a modification to smartd to implement the '-C' option
for SCSI disks.
Cheers,
Bruce
On Mon, 29 Aug 2005, mayuran yogarajah wrote:
> Here is the output from smartctl -a /dev/sda:
>
> Device: SEAGATE ST373307LW Version: DS04
> Serial number: 3HZ0E1QB
> Device type: disk
> Local Time is: Mon Aug 15 13:40:51 2005 EDT
> Device supports SMART and is Enabled
> Temperature Warning Enabled
> SMART Sense: Ok!
> Current Drive Temperature: 39 C
> Drive Trip Temperature: 68 C
>
> Error counter log:
> Errors Corrected Total Total Correction
> Gigabytes Total
> delay: [rereads/ errors algorithm
> processed uncorrected
> minor | major rewrites] corrected invocations [109
> bytes] errors
> read: 46448456 0 0 46448456 46594784 10018.347
> 0
> write: 0 0 269 67 8853 2954.991
> 1
> verify: 0 0 0 0 0 0.000
> 0
>
> Non-medium error count: 6083
>
> SMART Self-test log
> Num Test Status segment LifeTime
> LBA_first_err [SK ASC ASQ]
> Description number (hours)
> # 1 Background long Completed - 7
> - [- - -]
> # 2 Background short Completed - 7
> - [- - -]
> # 3 Background short Completed - 1
> - [- - -]
> # 4 Background short Completed - 1
> - [- - -]
>
> Long (extended) Self Test duration: 1488 seconds [24.8 minutes]
>
> I would like smartd to send an email if there are any uncorrected
> errors. I suspect its not doing this because the overall status is
> 'OK'. How can I go about doing this ?
>
> thanks,
> M
>
>
> -------------------------------------------------------
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> _______________________________________________
> Smartmontools-support mailing list
> Sma...@li...
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
>
>
|
