[smartmontools-support]smart sense says OK but there are uncorrected errors

[mayuran y. <may...@gm...>]

Here is the output from smartctl -a /dev/sda:

Device: SEAGATE  ST373307LW       Version: DS04
Serial number: 3HZ0E1QB
Device type: disk
Local Time is: Mon Aug 15 13:40:51 2005 EDT
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Sense: Ok!
Current Drive Temperature:     39 C
Drive Trip Temperature:        68 C

Error counter log:
          Errors Corrected    Total      Total   Correction
Gigabytes    Total
              delay:       [rereads/    errors   algorithm
processed    uncorrected
            minor | major  rewrites]  corrected  invocations   [109
bytes]  errors
read:   46448456        0         0  46448456   46594784      10018.347
0
write:         0        0       269        67       8853       2954.991
1
verify:        0        0         0         0          0          0.000
0

Non-medium error count:     6083

SMART Self-test log
Num  Test              Status                 segment  LifeTime
LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -     7
- [-   -    -]
# 2  Background short  Completed                   -     7
- [-   -    -]
# 3  Background short  Completed                   -     1
- [-   -    -]
# 4  Background short  Completed                   -     1
- [-   -    -]

Long (extended) Self Test duration: 1488 seconds [24.8 minutes]

I would like smartd to send an email if there are any uncorrected
errors.  I suspect its not doing this because the overall status is
'OK'.  How can I go about doing this ?

thanks,
M