From: Bruce A. <ba...@gr...> - 2006-06-15 06:07:18
|
Apparently the raw value of the Attribute 9 is (14*3600+14*60)/30 = 1708 So for this particular disk the RAW value is hours. I guess we need to add a '-v 9,hours' option. Did you try '-P ignore' ? Bruce On Thu, 15 Jun 2006, Volker Kuhlmann wrote: > Device Model: SAMSUNG SP2504C > Serial Number: S09QJ10Y954xxx > Firmware Version: VT100-33 > > match smartmontools Drive Database entry: > MODEL REGEXP: ^SAMSUNG.* > FIRMWARE REGEXP: .*-(2[6789]|3[0-9])$ > ATTRIBUTE OPTIONS: 009 Power_On_Half_Minutes > > 9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always - 14h+14m > > Uhm, no. In use for 6 months, I would guess the powerup-time to be > 12-18h/day. > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Short offline Completed without error 00% 1707 - > > That's more like it, though only about 9.5h/day. (Perhaps I'm not such a > nerd afterall ;) ) > > I'll verify the exact interval for v9, but halfminutes is bogus here. > At least the firmware regexp needs to be updated. > > Using -Fsamsung makes the selftest log unreadable, -Fsamsung2 gives the > same output as not using it. Base options are smartctl -d ata /dev/sda. > > There is no -v9,hour, but there should be. > > Does using -Pignore only remove the v9,halfminutes setting? > > Have there been any disks observed with -v9,halfhour behaviour? > > smartmontools-5.33, SUSE-supplied. Arrg, I just see there's a 5.36, but > have one more datapoint for the models list anyway. > > Greetings, > > Volker > > -- > Volker Kuhlmann is list0570 with the domain in header > http://volker.dnsalias.net/ Please do not CC list postings to me. > > > _______________________________________________ > Smartmontools-support mailing list > Sma...@li... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |