|
From: Gordon S. <gor...@x-...> - 2006-05-11 10:15:45
|
Hi Smartmon-Support, another HD that isn't supported. Could you give me a hint, how to fix it? Thx and Regards, Gordon web2 smartmontools # smartctl -a -d 3ware,1 /dev/twe0 smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Alle= n Home page is http://smartmontools.sourceforge.net/ =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: WDC WD2500YD-01NVB1 Serial Number: WD-WCANK2507410 Firmware Version: 10.02E01 User Capacity: 251.000.193.024 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu May 11 12:11:59 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting=20 command from host. Auto Offline Data Collection:=20 Enabled. Self-test execution status: ( 0) The previous self-test routine=20 completed without error or no self-test=20 has ever been run. Total time to complete Offline data collection: (7800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection=20 on/off support. Suspend Offline collection upon n= ew command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported= . Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 91) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE =20 UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail =20 Always - 0 3 Spin_Up_Time 0x0003 200 200 021 Pre-fail =20 Always - 4991 4 Start_Stop_Count 0x0032 100 100 000 Old_age =20 Always - 17 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail =20 Always - 0 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail =20 Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age =20 Always - 909 10 Spin_Retry_Count 0x0013 100 253 051 Pre-fail =20 Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age =20 Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age =20 Always - 17 190 Unknown_Attribute 0x0022 038 022 045 Old_age =20 Always FAILING_NOW 62 194 Temperature_Celsius 0x0022 088 072 000 Old_age =20 Always - 62 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age =20 Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age =20 Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age =20 Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age =20 Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail =20 Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining =20 LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% =20 850 - # 2 Short offline Completed without error 00% =20 826 - # 3 Short offline Completed without error 00% =20 802 - # 4 Short offline Completed without error 00% =20 778 - # 5 Short offline Completed without error 00% =20 754 - # 6 Short offline Completed without error 00% =20 730 - # 7 Short offline Completed without error 00% =20 706 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute dela= y. --=20 Gordon Schmidt System Administration X-CELL COMMUNICATIONS GmbH -------------------------- Office Ratingen Broichhofstr. 13 40880 Ratingen Phone: +49 (0)2102/55344-39 Fax: +49 (0)2102/55344-40 -------------------------- Office D=FCsseldorf Glockenstr. 33c 40476 D=FCsseldorf Phone: +49 (0)211/58040-30 Fax: +49 (0)211/58040-31 -------------------------- web: www.x-cell.com e-mail: gor...@x-... -------------------------- X-CELL COMMUNICATIONS unterst=FCtzt Ihren Unternehmenserfolg durch Konzep= tion, Realisierung und Betreuung von innovativen webbasierten Kommunikati= onsl=F6sungen. X-CELL COMMUNICATIONS ensures the success of your company by conceptual d= esign, development and support of innovative web-based solutions for opti= mization of communication processes. |