Re: [smartmontools-support]sun v240 console message

[Bruce A. <ba...@gr...>]

Casper, Keiji, Doug,

Any ideas about this?

Cheers,	
	Bruce

On Thu, 17 Feb 2005, hans wrote:

> 
> 
> hi all 
> 
> i did compile smartmontools-5.33 successfully 
> on solaris 9 ultra sparc IIIi ( sun v240 ) 
> if i key in "smartctl -a /dev/rdsk/c1t0d0s0"
> i get usefull values (see below), but on the console i 
> get the following message: 
> 
> scsi: WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0):
> Error for Command: <undecoded cmd 0x4d>    Error Level: Informational
> scsi:        Requested Block: 0                         Error Block: 0
> scsi:       Vendor: SEAGATE                            Serial Number: 0438B964RN  
> scsi:        Sense Key: Illegal Request
> scsi:        ASC: 0x24 (invalid field in cdb), ASCQ: 0x0, FRU: 0xa
> 
> it looks for me, that command x4d couldn't be understood 
> independent the used harddisk. 
> is there a way to modify source, so that x4d isn't sent
> and recompile smartctl ? 
> 
> best regards 
> hans 
> 
> 
> --------------------- result of smartctl -------------------------------------------------
> smartctl version 5.33 [sparc-sun-solaris2.9] Copyright (C) 2002-4 Bruce Allen
> Home page is http://smartmontools.sourceforge.net/
> 
> Device: SEAGATE  ST373307LSUN72G  Version: 0507
> Serial number: 3HZ964RN0000751072N8
> Device type: disk
> Transport protocol: Parallel SCSI (SPI-4)
> Local Time is: Thu Feb 17 23:25:37 2005 CET
> Device supports SMART and is Enabled
> Temperature Warning Enabled
> SMART Health Status: OK
> 
> Current Drive Temperature:     22 C
> Drive Trip Temperature:        68 C
> Vendor (Seagate) cache information
>   Blocks sent to initiator = 739812597
>   Blocks received from initiator = 270156189
>   Blocks read from cache and sent to initiator = 791737140
>   Number of read and write commands whose size <= segment size = 104837229
>   Number of read and write commands whose size > segment size = 0
> Vendor (Seagate/Hitachi) factory information
>   number of hours powered up = 2569.75
>   number of minutes until next internal SMART test = 28
> 
> Error counter log:
>            Errors Corrected by           Total   Correction     Gigabytes    Total
>                EEC          rereads/    errors   algorithm      processed    uncorrected
>            fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
> read:    4572251        0         0   4572251    4572251       7266.191           0
> write:         0        0         0         0          0        180.442           0
> 
> Non-medium error count:     9509
> 
> Error Events logging not supported
> 
> SMART Self-test log
> Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
>      Description                              number   (hours)
> # 1  Background short  Completed                   -     2                   - [-   -    -]
> # 2  Background short  Completed                   -     2                   - [-   -    -]
> 
> Long (extended) Self Test duration: 1488 seconds [24.8 minutes]
> 
> 
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Smartmontools-support mailing list
> Sma...@li...
> https://lists.sourceforge.net/lists/listinfo/smartmontools-support
> 
>