[smartmontools-support]SMART error question

[Thane S. <ts...@au...>]

A drive I'm testing with smartctl, gives the following:

Error 65 occurred at disk power-on lifetime: 1403 hours (58 days + 11 hours)
   When the command that caused the error occurred, the device was in an 
unknown state.

   After command completion occurred, registers were:
   ER ST SC SN CL CH DH
   -- -- -- -- -- -- --
   04 51 00 00 00 00 a0  Error: ABRT

   Commands leading to the command that caused the error were:
   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
   -- -- -- -- -- -- -- --  ----------------  --------------------
   a1 00 00 00 00 00 a0 00      00:05:58.224  IDENTIFY PACKET DEVICE
   c4 ff 01 01 00 00 e0 08      00:04:47.232  READ MULTIPLE
   c4 ff 01 00 00 00 e0 08      00:04:47.232  READ MULTIPLE
   c4 ff 01 01 00 00 e0 08      00:03:34.000  READ MULTIPLE
   c4 ff 01 00 00 00 e0 08      00:03:34.000  READ MULTIPLE

<snip other info>

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours) 
  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1403         -
# 2  Short offline       Completed without error       00%         0         -

It looks to me like an error occured during the extended tests (error 65 
ABRT) although the tests say the drive is fine.  Which do I trust here?

T 

---
[This E-mail scanned for viruses by Declude Anti-Virus]