Menu
▾
▴
[smartmontools-support]SMART error (CurrentPendingSector) detected on host: sombrero
|
From: Orion P. <or...@co...> - 2005-01-10 18:51:46
|
I'm getting the following at boot from one of our machines:
This email was generated by the smartd daemon running on:
host name: sombrero
DNS domain: cora.nwra.com
NIS domain: yp.colorado-research.com
The following warning/error was logged by the smartd daemon:
Device: /dev/hda, 1 Currently unreadable (pending) sectors
For details see host's SYSLOG (default: /var/log/messages).
You can also use the smartctl utility for further investigation.
No additional email messages about this problem will be sent.
--
It appears that this is an old condition, though I'm not sure. Is
there any way to clear it? Thanks!
[root@sombrero ~]# smartctl -a /dev/hda
smartctl version 5.33 [i386-redhat-linux-gnu] Copyright (C) 2002-4 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: IBM-DARA-212000
Serial Number: AH0AH1Z6434
Firmware Version: AR4OA54A
User Capacity: 12,072,517,632 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 4
ATA Standard is: ATA/ATAPI-4 T13 1153D revision 17
Local Time is: Mon Jan 10 11:50:02 2005 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: (1950) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 22) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail
Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail
Offline - 0
3 Spin_Up_Time 0x0007 129 129 033 Pre-fail
Always - 1
4 Start_Stop_Count 0x0012 100 100 000 Old_age
Always - 896
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail
Offline - 0
9 Power_On_Hours 0x0012 025 025 000 Old_age
Always - 33041
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 863
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 8
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 122 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 122 occurred at disk power-on lifetime: 16619 hours (692 days + 11
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 07 02 0c a0 Error: UNC 24 sectors at LBA = 0x000c0207 = 786951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 ff 01 0c e0 00 00:05:33.700 READ DMA
c8 00 28 f7 01 0c e0 00 00:05:27.200 READ DMA
c8 00 30 ef 01 0c e0 00 00:05:20.700 READ DMA
c8 00 38 e7 01 0c e0 00 00:05:14.200 READ DMA
c8 00 40 df 01 0c e0 00 00:05:07.800 READ DMA
Error 121 occurred at disk power-on lifetime: 16619 hours (692 days + 11
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 07 02 0c a0 Error: UNC 24 sectors at LBA = 0x000c0207 = 786951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 f7 01 0c e0 00 00:05:27.200 READ DMA
c8 00 30 ef 01 0c e0 00 00:05:20.700 READ DMA
c8 00 38 e7 01 0c e0 00 00:05:14.200 READ DMA
c8 00 40 df 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 9f 01 0c e0 00 00:05:07.800 READ DMA
Error 120 occurred at disk power-on lifetime: 16619 hours (692 days + 11
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 07 02 0c a0 Error: UNC 24 sectors at LBA = 0x000c0207 = 786951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 30 ef 01 0c e0 00 00:05:20.700 READ DMA
c8 00 38 e7 01 0c e0 00 00:05:14.200 READ DMA
c8 00 40 df 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 9f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 5f 01 0c e0 00 00:05:07.800 READ DMA
Error 119 occurred at disk power-on lifetime: 16619 hours (692 days + 11
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 07 02 0c a0 Error: UNC 24 sectors at LBA = 0x000c0207 = 786951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 38 e7 01 0c e0 00 00:05:14.200 READ DMA
c8 00 40 df 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 9f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 5f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 1f 01 0c e0 00 00:05:07.800 READ DMA
Error 118 occurred at disk power-on lifetime: 16619 hours (692 days + 11
hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 07 02 0c a0 Error: UNC 24 sectors at LBA = 0x000c0207 = 786951
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 df 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 9f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 5f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 40 1f 01 0c e0 00 00:05:07.800 READ DMA
c8 00 08 17 01 0c e0 00 00:05:07.800 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 32962
-
Device does not support Selective Self Tests/Logging
--
Orion Poplawski
System Administrator 303-415-9701 x222
Colorado Research Associates/NWRA FAX: 303-415-9702
3380 Mitchell Lane, Boulder CO 80301 http://www.co-ra.com
|
