|
From: Michael M. <mi...@np...> - 2004-12-22 00:54:56
|
Hi Bruce, > > Dec 21 11:39:26 xxxxxxx smartd[2990]: Device: /dev/hda, 1 Currently unreadable > > (pending) sectors > > Dec 21 11:39:26 xxxxxxx smartd[2990]: Device: /dev/hda, 1 Offline > > uncorrectable sectors > > > > Running a long test only shows: > > > > === START OF READ SMART DATA SECTION === > > SMART Self-test log structure revision number 1 > > Num Test_Description Status Remaining LifeTime(hours) > > LBA > > _of_first_error > > # 1 Extended offline Completed without error 00% 5778 - > > # 2 Extended offline Completed without error 00% 5762 - > > # 3 Short offline Completed without error 00% 5762 - > > Apparently some drives don't zero out the unreadable/offline-uncorrectable > sector counts, even after the sectors have been reallocated. You > might be able to get the drive to do this using the '-t offline' test. I've ran this with the following results: Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 080 069 034 Pre-fail Always - 742482 3 Spin_Up_Time 0x0003 070 070 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 46 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 118904004 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5795 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 181 194 Temperature_Celsius 0x0022 027 046 000 Old_age Always - 27 195 Hardware_ECC_Recovered 0x001a 080 069 000 Old_age Always - 742482 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 I neglected to capture what it was before the run. But I'll reboot the machine and see if those error emails are sent again. Thanks. Michael. |