Re: [smartmontools-support]Problem with Promise ultra 133 Tx2 (possibly)

[Bengt-Arne F. <Ben...@lt...>]

Disc supports it!
I have tried the same disc on the builtin controller and it works fine.
Just wondering if this is a Program/Bios/Controller/Driver problem.

And how to test it.
but here follows output

.... smartmontools-5.33-1.win32\bin>smartctl.exe -a hdc
smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D
Device Model:     WDC WD600JB-00CRA1
Serial Number:    WD-WMA8F1721798
Firmware Version: 17.07W17
User Capacity:    60,022,480,896 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   5
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Nov 05 10:58:33 2004 V=F5steuropa, normaltid
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Ena=
bled.
Self-test execution status:      ( 247) Self-test routine in progress...
                                        70% of test remaining.
Total time to complete Offline
data collection:                 (2340) seconds.
Offline data collection
capabilities:                    (0x3b) SMART execute Offline immediate.
                                        Auto Offline data collection on/o=
ff support.
                                        Suspend Offline collection upon n=
ew
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging suppor=
t.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  43) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED=
=20
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always =
      -   =20
  0
  3 Spin_Up_Time            0x0007   115   096   021    Pre-fail  Always =
      -   =20
  3325
  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always =
      -   =20
  291
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always =
      -   =20
  0
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always =
      -   =20
  0
  9 Power_On_Hours          0x0032   088   088   000    Old_age   Always =
      -   =20
  9294
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always =
      -   =20
  0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always =
      -   =20
  0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always =
      -   =20
  289
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always =
      -   =20
  0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always =
      -   =20
  0
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always =
      -   =20
  0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always =
      -   =20
  0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline=
      -   =20
  0

Error SMART Error Log Read failed: Function not implemented
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Function not implemented
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging


Bruce Allen wrote:
>
>> On a Promise ultra 133 TX2 controller i get this answer both in
>> windows and linux. Is this a bug or doesnt this controller/driver
>> support this feature ?? I have ran these tests under both Os on the
>> same computer...
>>
>> Please CC im not on the list
>
> Please copy the list for further email.
>
>> C:\smartmontools-5.33-1.win32\bin>smartctl.exe -l error -l selftest hd=
c
>> smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce All=
en
>> Home page is http://smartmontools.sourceforge.net/
>>
>> =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D
>> Error SMART Error Log Read failed: Function not implemented
>> Smartctl: SMART Error Log Read Failed
>> Error SMART Error Self-Test Log Read failed: Function not implemented
>> Smartctl: SMART Self Test Log Read Failed
>>
>> C:\Documents and Settings\baf\Skrivbord\smartmontools-5.33-1.win32\bin=
>
>
> This may be a disk that doesn't support SMART logs.  Please send smartc=
tl
> -a output.
>
> Bruce
>


--=20
Bengt-Arne Fjellner
0910-58 53 69