Menu
▾
▴
Re: [smartmontools-support]Harddisk failing?
|
From: Bruce A. <ba...@gr...> - 2004-09-17 08:33:25
|
On Fri, 17 Sep 2004, Thomas B=F6rkel wrote: > HI! >=20 > Thanks for the fast reply. >=20 > Isn't it alarming, that: > - sometimes reading data takes up to 10 times longer > (top shows no wild process running) > - Raw_Read_Error_Rate has increased from 10000 to 70000 in 1 week > - Soft_Read_Error_Rate has increased from 70 to 320 in 1 week Yes, this does suggest that something is failing. Definitely keep an eye on these, and start running long self-tests on a regular basis. =20 > The drive is 7 months old and started this strange behaviour about 3=20 > weeks ago. >=20 > I am doing regular backups, so I would not loose much, if it would > die. But those drastically increased read times every now and then > are pretty annoying. Is the drive temperature fairly stable? Cheers,=09 Bruce > Bruce Allen wrote: > > Disk looks OK (at least for now). > >=20 > > Suggest that you update to smartmontools version 5.32, then use the sma= rtd > > '-s' Directive to start doing regular scheduled long self-tests of the > > disk, perhaps once or twice a week. > >=20 > > I also suggest that if you don't do regular backups, now is an excellen= t > > time to start. A cheap solution is to buy a second disk and make backu= ps > > to that. > >=20 > > Cheers,=09 > > Bruce > >=20 > > On Thu, 16 Sep 2004, Thomas B=F6rkel wrote: > >=20 > >=20 > >>HI! > >> > >>My Samsung SP1604N is exhibiting some bad behaviour lately every now an= d=20 > >>then (not always). > >> > >>When it happens, reading from disk takes much longer than normally and= =20 > >>the hard disk LED is almost always on while acessing. When access ends,= =20 > >>HD LED goes off normally. > >> > >>Long selftest of the HD did not reveal any problems. > >> > >>Raw_Read_Error_Rate (+60000) and Soft_Read_Error_Rate (+250) have=20 > >>increased much during the last week. Is the HD going to die? > >> > >>Attaching the current output of smartctl -a. > >> > >>Thanks! > >> > >>Thomas > >> > >> > >>smartctl version 5.21 Copyright (C) 2002-3 Bruce Allen > >>Home page is http://smartmontools.sourceforge.net/ > >> > >>=3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D > >>Device Model: SAMSUNG SP1604N > >>Serial Number: S013J10WC92543 > >>Firmware Version: TM100-24 > >>Device is: In smartctl database [for details use: -P show] > >>ATA Version is: 7 > >>ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 > >>Local Time is: Thu Sep 16 19:55:27 2004 CEST > >>SMART support is: Available - device has SMART capability. > >>SMART support is: Enabled > >> > >>=3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D > >>SMART overall-health self-assessment test result: PASSED > >> > >>General SMART Values: > >>Offline data collection status: (0x00) Offline data collection activit= y was > >> never started. > >> Auto Offline Data Collection:= =20 > >>Disabled. > >>Self-test execution status: ( 0) The previous self-test routine= =20 > >>completed > >> without error or no self-test= =20 > >>has ever > >> been run. > >>Total time to complete Offline > >>data collection: (5760) seconds. > >>Offline data collection > >>capabilities: (0x1b) SMART execute Offline immediate= =2E > >> Auto Offline data collection= =20 > >>on/off support. > >> Suspend Offline collection upo= n new > >> command. > >> Offline surface scan supported= =2E > >> Self-test supported. > >> No Conveyance Self-test suppor= ted. > >> No Selective Self-test support= ed. > >>SMART capabilities: (0x0003) Saves SMART data before enterin= g > >> power-saving mode. > >> Supports SMART auto save timer= =2E > >>Error logging capability: (0x01) Error logging supported. > >> No General Purpose Logging sup= port. > >>Short self-test routine > >>recommended polling time: ( 1) minutes. > >>Extended self-test routine > >>recommended polling time: ( 96) minutes. > >> > >>SMART Attributes Data Structure revision number: 16 > >>Vendor Specific SMART Attributes with Thresholds: > >>ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE=20 > >>UPDATED WHEN_FAILED RAW_VALUE > >> 1 Raw_Read_Error_Rate 0x000b 095 095 051 Pre-fail=20 > >>Always - 77458 > >> 3 Spin_Up_Time 0x0007 066 056 000 Pre-fail=20 > >>Always - 5824 > >> 4 Start_Stop_Count 0x0032 100 100 000 Old_age=20 > >>Always - 104 > >> 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail=20 > >>Always - 0 > >> 7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail=20 > >>Always - 0 > >> 8 Seek_Time_Performance 0x0024 253 253 000 Old_age=20 > >>Offline - 0 > >> 9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age=20 > >>Always - 4361h+46m > >> 10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail=20 > >>Always - 0 > >> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age=20 > >>Always - 57 > >>194 Temperature_Celsius 0x0022 115 070 000 Old_age Alway= s=20 > >> - 41 > >>195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Alway= s=20 > >> - 484330054 > >>196 Reallocated_Event_Count 0x0012 253 253 000 Old_age Alway= s=20 > >> - 0 > >>197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Alway= s=20 > >> - 0 > >>198 Offline_Uncorrectable 0x0031 253 253 010 Pre-fail=20 > >>Offline - 0 > >>199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Alway= s=20 > >> - 0 > >>200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Alway= s=20 > >> - 0 > >>201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Alway= s=20 > >> - 321 > >> > >>SMART Error Log Version: 1 > >>Warning: ATA error count 512 inconsistent with error log pointer 5 > >> > >>ATA Error Count: 512 (device log contains only the most recent five err= ors) > >> CR =3D Command Register [HEX] > >> FR =3D Features Register [HEX] > >> SC =3D Sector Count Register [HEX] > >> SN =3D Sector Number Register [HEX] > >> CL =3D Cylinder Low Register [HEX] > >> CH =3D Cylinder High Register [HEX] > >> DH =3D Device/Head Register [HEX] > >> DC =3D Device Command Register [HEX] > >> ER =3D Error register [HEX] > >> ST =3D Status register [HEX] > >>Timestamp =3D decimal seconds since the previous disk power-on. > >>Note: timestamp "wraps" after 2^32 msec =3D 49.710 days. > >> > >>Error 512 occurred at disk power-on lifetime: 108 hours > >> When the command that caused the error occurred, the device was=20 > >>active or idle. > >> > >> After command completion occurred, registers were: > >> ER ST SC SN CL CH DH > >> -- -- -- -- -- -- -- > >> 04 51 00 00 4f c2 f0 > >> > >> Commands leading to the command that caused the error were: > >> CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name > >> -- -- -- -- -- -- -- -- --------- -------------------- > >> b0 da 00 00 4f c2 f0 00 304662.313 SMART RETURN STATUS > >> ec 00 00 7c 9d bf f0 00 304662.313 IDENTIFY DEVICE > >> ec 00 01 00 00 00 f0 00 248808.313 IDENTIFY DEVICE > >> ec 00 01 00 00 00 f0 00 248808.313 IDENTIFY DEVICE > >> ec 00 01 00 00 00 f0 00 248808.250 IDENTIFY DEVICE > >> > >>Error 511 occurred at disk power-on lifetime: 0 hours > >> When the command that caused the error occurred, the device was=20 > >>active or idle. > >> > >> After command completion occurred, registers were: > >> ER ST SC SN CL CH DH > >> -- -- -- -- -- -- -- > >> 04 51 00 01 00 00 a0 > >> > >> Commands leading to the command that caused the error were: > >> CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name > >> -- -- -- -- -- -- -- -- --------- -------------------- > >> b1 c0 00 01 00 00 a0 00 11.875 DEVICE CONFIGURATION RESTORE > >> ec 00 03 01 00 00 a0 00 11.875 IDENTIFY DEVICE > >> 91 00 3f 01 00 00 af 00 11.875 INITIALIZE DEVICE PARAMETERS [O= BS-6] > >> 10 00 00 01 00 00 a0 00 11.875 RECALIBRATE [OBS-4] > >> ec 00 01 01 00 00 a0 00 11.875 IDENTIFY DEVICE > >> > >>SMART Self-test log structure revision number 1 > >>Num Test_Description Status Remaining=20 > >>LifeTime(hours) LBA_of_first_error > >># 1 Extended offline Completed without error 00% 4245=20 > >> - > >> > >> > >> > >>------------------------------------------------------- > >>This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 > >>Project Admins to receive an Apple iPod Mini FREE for your judgement on > >>who ports your project to Linux PPC the best. Sponsored by IBM. > >>Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php > >>_______________________________________________ > >>Smartmontools-support mailing list > >>Sma...@li... > >>https://lists.sourceforge.net/lists/listinfo/smartmontools-support > >> > >> > >=20 > >=20 > >=20 > >=20 > > ------------------------------------------------------- > > This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 > > Project Admins to receive an Apple iPod Mini FREE for your judgement on > > who ports your project to Linux PPC the best. Sponsored by IBM. > > Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php > > _______________________________________________ > > Smartmontools-support mailing list > > Sma...@li... > > https://lists.sourceforge.net/lists/listinfo/smartmontools-support >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 > Project Admins to receive an Apple iPod Mini FREE for your judgement on > who ports your project to Linux PPC the best. Sponsored by IBM. > Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php > _______________________________________________ > Smartmontools-support mailing list > Sma...@li... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support >=20 >=20 |