Menu
▾
▴
[smartmontools-support]Spurious Current_Pending_Sector and Offline_Uncorrectable?
|
From: Christopher B. <chr...@or...> - 2004-08-04 10:57:43
|
Hi there, My smartd has begun reporting that I have 1 Current_Pending_Sectors and 1 Offline_Uncorrectable sectors on my disk. I've followed the Bad Block Howto at http://smartmontools.sourceforge.net/BadBlockHowTo.txt but I can't seem to get to the bottom of this at all. It's odd because the self-tests don't fail at all, and the only error that happened is in my Windows partition that I haven't used for god know how long. Can anybody shed any light on this? I'm not subscribed to the list, so can people please CC me? FWIW I'm running Debian Sarge/Testing. This /may/ have started after an upgrade of smartmontools on the box, but I can't confirm or deny that. Thanks very much in advance! - Chris PS: If anyone sees something obviously wrong with my disk please shout! The output from "fdisk -lu /dev/hda" is: Disk /dev/hda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 63 12289724 6144831 7 HPFS/NTFS /dev/hda2 12289725 24001109 5855692+ 83 Linux /dev/hda3 24001110 234436544 105217717+ 5 Extended /dev/hda5 24001173 24997139 497983+ 82 Linux swap /dev/hda6 24997203 234436544 104719671 83 Linux The output from "smartctl -a /dev/hda" is: smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3120022A Serial Number: 5JT01BDW Firmware Version: 3.06 Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Wed Aug 4 11:39:10 2004 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 88969659 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 13 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 29 7 Seek_Error_Rate 0x000f 065 060 030 Pre-fail Always - 257910606752 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 6076 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 55 194 Temperature_Celsius 0x0022 046 054 000 Old_age Always - 46 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 88969659 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 099 252 000 Old_age Always - 1 SMART Error Log Version: 1 ATA Error Count: 963 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 963 occurred at disk power-on lifetime: 4129 hours (172 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 60 9f 11 90 e0 Error: UNC 96 sectors at LBA = 0x0090119f = 9441695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 60 9f 11 90 e0 00 03:49:13.404 READ DMA EXT 25 00 68 97 11 90 e0 00 03:49:09.412 READ DMA EXT 25 00 70 8f 11 90 e0 00 03:49:05.444 READ DMA EXT 25 00 78 87 11 90 e0 00 03:49:01.420 READ DMA EXT 25 00 80 7f 11 90 e0 00 03:48:57.366 READ DMA EXT Error 962 occurred at disk power-on lifetime: 4129 hours (172 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f 11 90 e0 Error: UNC at LBA = 0x0090119f = 9441695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 68 97 11 90 e0 00 03:49:13.404 READ DMA EXT 25 00 70 8f 11 90 e0 00 03:49:09.412 READ DMA EXT 25 00 78 87 11 90 e0 00 03:49:05.444 READ DMA EXT 25 00 80 7f 11 90 e0 00 03:49:01.420 READ DMA EXT 25 00 88 77 11 90 e0 00 03:48:57.366 READ DMA EXT Error 961 occurred at disk power-on lifetime: 4129 hours (172 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f 11 90 e0 Error: UNC at LBA = 0x0090119f = 9441695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 70 8f 11 90 e0 00 03:49:13.404 READ DMA EXT 25 00 78 87 11 90 e0 00 03:49:09.412 READ DMA EXT 25 00 80 7f 11 90 e0 00 03:49:05.444 READ DMA EXT 25 00 88 77 11 90 e0 00 03:49:01.420 READ DMA EXT 25 00 90 6f 11 90 e0 00 03:48:57.366 READ DMA EXT Error 960 occurred at disk power-on lifetime: 4129 hours (172 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f 11 90 e0 Error: UNC at LBA = 0x0090119f = 9441695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 78 87 11 90 e0 00 03:49:13.404 READ DMA EXT 25 00 80 7f 11 90 e0 00 03:49:09.412 READ DMA EXT 25 00 88 77 11 90 e0 00 03:49:05.444 READ DMA EXT 25 00 90 6f 11 90 e0 00 03:49:01.420 READ DMA EXT 25 00 98 67 11 90 e0 00 03:48:57.366 READ DMA EXT Error 959 occurred at disk power-on lifetime: 4129 hours (172 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f 11 90 e0 Error: UNC at LBA = 0x0090119f = 9441695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 7f 11 90 e0 00 03:48:12.809 READ DMA EXT 25 00 88 77 11 90 e0 00 03:49:09.412 READ DMA EXT 25 00 90 6f 11 90 e0 00 03:49:05.444 READ DMA EXT 25 00 98 67 11 90 e0 00 03:49:01.420 READ DMA EXT 25 00 a0 5f 11 90 e0 00 03:48:57.366 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6067 - # 2 Short offline Completed without error 00% 6043 - # 3 Short offline Completed without error 00% 6020 - # 4 Extended offline Completed without error 00% 6017 - # 5 Short offline Completed without error 00% 5996 - # 6 Extended offline Completed without error 00% 5974 - # 7 Short offline Completed without error 00% 5972 - # 8 Short offline Completed without error 00% 5949 - # 9 Short offline Completed without error 00% 5925 - #10 Short offline Completed without error 00% 5901 - #11 Short offline Completed without error 00% 5878 - #12 Short offline Completed without error 00% 5854 - #13 Short offline Completed without error 00% 5831 - #14 Extended offline Completed without error 00% 5808 - #15 Short offline Completed without error 00% 5807 - #16 Short offline Completed without error 00% 5783 - #17 Short offline Completed without error 00% 5760 - #18 Short offline Completed without error 00% 5736 - #19 Short offline Completed without error 00% 5712 - #20 Short offline Completed without error 00% 5688 - #21 Short offline Completed without error 00% 5665 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |
