[Smartmontools-support]Re: Seek Error Rate

[<li...@pe...>]

Right, buy any ideas about what may cause Seek Error Rate ?
High temperature ? Here it's running at 55=B0C (very hot days ->
40=B0C).

BTW, what happened to the drive from
http://smartmontools.sourceforge.net/examples/MAXTOR-2.txt ?

http://smartmontools.sourceforge.net/examples/MAXTOR-1.txt

has the same Seek_Error_Rate, but Reallocated_Sector_Ct and
Current_Pending_Sector...

And I'm surprised it was running at 168 (=B0C ?). The other was
at 24.

> On Sun, 9 Feb 2003, Bruce Allen wrote:
>
> Hi,
>
> These quantities (rates) do vary up and down.  In this case the low raw
> value (0) is good.  The point is that the seek error rate has gone down,
> which means that Attribute value has gone up.
>
> I wouldn't worry too much about this, at least, not yet!

--=20
0@pervalidus.{net, {dyndns.}org}