From: Arun A. <aa...@gm...> - 2016-07-25 01:05:45
|
Hi, Just a reminder. Could you share your thoughts on my below request? Thanks, Arun. > On 15-Jul-2016, at 11:20 AM, Arun Anbalagan <aa...@gm...> wrote: > > Hi there, > > I'm trying to query the SMART metrics (-A / -a) in my Windows server. But, using 'smartctl -A /dev/sda' doesn't help, as I received the following error: > > # smartctl -A /dev/sda > Read Device Identity failed: Input/output Error > A mandatory Smart command failed: exiting. To continue, add one or more '-T permissive' option. > > Hence, I tried finding the correct 'device' type, using 'smartctl -d test'. > > # smartctl -d test /dev/sda > /dev/sda: Device of type 'ata' [ATA] detected > /dev/sda: Device of type 'ata' [ATA] opened > > I assumed that the right option to use should be '-d ata', and issued the command as follows: > # smartctl -A -d ata /dev/sda > > Unfortunately, it failed with the same error message shown above (noticed with 'smartctl -A /dev/sda'). > > After some research, I decided to use '# smartrctl -A -d sat /dev/sda', and smartctl behaved correctly and displayed the metrics. > > I'm just wondering, why 'smartctl -d test' doesn't display 'sat'. Isn't the output of 'smartctl -d test' misleading? Please correct me if I have misunderstood something here. I'm using Windows 7, with the hard disks being 'Samsung MZMLN256HCHP-000' SSD disks. > > Since I'm not quite aware of the disk types before running 'smartctl -A', I rely on 'smartctl -d test' to decide them. Is there any known issue with '-d test' in Windows? If so, is there any other method to get the device type? Thanks for your inputs. > > Regards, > Arun. |