Menu
▾
▴
[Smartmontools-database] Device Model: TOSHIBA DT01ABA300V
|
From: lee <ubu...@gm...> - 2016-06-14 22:16:11
|
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA DT01ABA300V Firmware Version: MZ6OACA0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5940 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jun 11 03:04:43 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26282) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 438) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 144 144 054 - 83 3 Spin_Up_Time POS--- 217 217 024 - 265 (Average 240) 4 Start_Stop_Count -O--C- 100 100 000 - 25 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 138 138 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 357 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 19 192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 193 Load_Cycle_Count -O--C- 100 100 000 - 25 194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max 21/33) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 356 - # 2 Short offline Completed without error 00% 345 - # 3 Short offline Completed without error 00% 308 - # 4 Extended offline Completed without error 00% 255 - # 5 Short offline Completed without error 00% 248 - # 6 Short offline Completed without error 00% 206 - # 7 Extended offline Completed without error 00% 7 - # 8 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 25/30 Celsius Lifetime Min/Max Temperature: 21/33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (65) Index Estimated Time Temperature Celsius 66 2016-06-11 00:57 27 ******** 67 2016-06-11 00:58 27 ******** 68 2016-06-11 00:59 28 ********* ... ..( 13 skipped). .. ********* 82 2016-06-11 01:13 28 ********* 83 2016-06-11 01:14 27 ******** ... ..( 4 skipped). .. ******** 88 2016-06-11 01:19 27 ******** 89 2016-06-11 01:20 28 ********* 90 2016-06-11 01:21 27 ******** 91 2016-06-11 01:22 27 ******** 92 2016-06-11 01:23 27 ******** 93 2016-06-11 01:24 28 ********* ... ..( 17 skipped). .. ********* 111 2016-06-11 01:42 28 ********* 112 2016-06-11 01:43 27 ******** 113 2016-06-11 01:44 28 ********* 114 2016-06-11 01:45 28 ********* 115 2016-06-11 01:46 27 ******** 116 2016-06-11 01:47 28 ********* 117 2016-06-11 01:48 27 ******** 118 2016-06-11 01:49 28 ********* 119 2016-06-11 01:50 28 ********* 120 2016-06-11 01:51 27 ******** 121 2016-06-11 01:52 28 ********* 122 2016-06-11 01:53 27 ******** 123 2016-06-11 01:54 27 ******** 124 2016-06-11 01:55 28 ********* 125 2016-06-11 01:56 27 ******** ... ..( 18 skipped). .. ******** 16 2016-06-11 02:15 27 ******** 17 2016-06-11 02:16 28 ********* 18 2016-06-11 02:17 27 ******** 19 2016-06-11 02:18 27 ******** 20 2016-06-11 02:19 28 ********* 21 2016-06-11 02:20 27 ******** ... ..( 2 skipped). .. ******** 24 2016-06-11 02:23 27 ******** 25 2016-06-11 02:24 28 ********* 26 2016-06-11 02:25 27 ******** ... ..( 13 skipped). .. ******** 40 2016-06-11 02:39 27 ******** 41 2016-06-11 02:40 28 ********* 42 2016-06-11 02:41 27 ******** 43 2016-06-11 02:42 27 ******** 44 2016-06-11 02:43 28 ********* 45 2016-06-11 02:44 27 ******** 46 2016-06-11 02:45 27 ******** 47 2016-06-11 02:46 28 ********* 48 2016-06-11 02:47 27 ******** 49 2016-06-11 02:48 28 ********* ... ..( 3 skipped). .. ********* 53 2016-06-11 02:52 28 ********* 54 2016-06-11 02:53 27 ******** 55 2016-06-11 02:54 27 ******** 56 2016-06-11 02:55 27 ******** 57 2016-06-11 02:56 28 ********* 58 2016-06-11 02:57 27 ******** 59 2016-06-11 02:58 27 ******** 60 2016-06-11 02:59 28 ********* 61 2016-06-11 03:00 27 ******** ... ..( 2 skipped). .. ******** 64 2016-06-11 03:03 27 ******** 65 2016-06-11 03:04 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 19 --- Lifetime Power-On Resets 0x01 0x010 4 357 --- Power-on Hours 0x01 0x018 6 2160186952 --- Logical Sectors Written 0x01 0x020 6 1861878 --- Number of Write Commands 0x01 0x028 6 8200146342 --- Logical Sectors Read 0x01 0x030 6 27597157 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 357 --- Spindle Motor Power-on Hours 0x03 0x010 4 357 --- Head Flying Hours 0x03 0x018 4 25 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 4 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 27 N-- Average Short Term Temperature 0x05 0x018 1 - N-- Average Long Term Temperature 0x05 0x020 1 33 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x05 0x030 1 29 N-- Highest Average Short Term Temperature 0x05 0x038 1 23 N-- Lowest Average Short Term Temperature 0x05 0x040 1 - N-- Highest Average Long Term Temperature 0x05 0x048 1 - N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 422 --- Number of Hardware Resets 0x06 0x010 4 269 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 55 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 49 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS |
