[smartmontools-support] Unknown USB bridge [0x2109:0x0700 (0x005)]

[Weedy <wee...@gm...>]

Apr 18 19:29:59 localhost kernel: [ 1112.639973] usb 4-1: new
high-speed USB device number 7 using ehci-pci
Apr 18 19:29:59 localhost kernel: [ 1112.770761] usb 4-1: New USB
device found, idVendor=2109, idProduct=0700
Apr 18 19:29:59 localhost kernel: [ 1112.770769] usb 4-1: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Apr 18 19:29:59 localhost kernel: [ 1112.770773] usb 4-1: Product: USB
3.0 SATA Bridge
Apr 18 19:29:59 localhost kernel: [ 1112.770778] usb 4-1:
Manufacturer: VIA Labs, Inc.
Apr 18 19:29:59 localhost kernel: [ 1112.770782] usb 4-1:
SerialNumber: 0000000000006121
Apr 18 19:29:59 localhost kernel: [ 1112.775737] usb-storage 4-1:1.0:
USB Mass Storage device detected
Apr 18 19:29:59 localhost kernel: [ 1112.778874] scsi host20:
usb-storage 4-1:1.0


-d sat,12
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD1600BEVT-22ZCT0
Serial Number:    WD-WXE708H43628
LU WWN Device Id: 5 0014ee 2ac8083b4
Firmware Version: 11.01A11
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Sat Apr 18 19:37:12 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error medium or hardware error (serious)
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                    was suspended by an interrupting command from host.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test
routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         ( 5400) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  66) minutes.
Conveyance self-test routine
recommended polling time:      (   5) minutes.
SCT capabilities:            (0x303f)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail
Always       -       118
  3 Spin_Up_Time            0x0027   159   155   021    Pre-fail
Always       -       1050
  4 Start_Stop_Count        0x0032   091   091   000    Old_age
Always       -       9930
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age
Always       -       0
  9 Power_On_Hours          0x0032   086   086   000    Old_age
Always       -       10538
 10 Spin_Retry_Count        0x0033   100   099   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age
Always       -       0
 12 Power_Cycle_Count       0x0032   092   092   000    Old_age
Always       -       8513
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age
Always       -       1159
193 Load_Cycle_Count        0x0032   178   178   000    Old_age
Always       -       68246
194 Temperature_Celsius     0x0022   114   070   000    Old_age
Always       -       29
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age
Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age
Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age
Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

Read SMART Log Directory failed: scsi error medium or hardware error (serious)

Read SMART Error Log failed: scsi error medium or hardware error (serious)

Read SMART Self-test Log failed: scsi error medium or hardware error (serious)

Read SMART Selective Self-test Log failed: scsi error medium or
hardware error (serious)