Re: [smartmontools-support] smartctl health check fails

[Christian F. <Chr...@t-...>]

Chanda Yadavalli (cyadaval) wrote:
>
> After commenting that out, I get the following – does
>
> that still point to LSI firmware?
>
> ...
>
> REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS CHECK
>
> Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
>
> [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
>
> *sat_device::ata_pass_through: scsi_pass_through() failed, errno=5 
> [megasas_cmd result: 1.4 = 0/45]*
>
> *[Duration: 0.107s]*
>

Yes, MEGASAS_IOC_FIRMWARE returns cmd_status = 45.

Thanks,
Christian