Re: [smartmontools-support] smartd doesnt notify me about critical temperatures

[Christian F. <Chr...@t-...>]

mails wrote:
> Am 01.10.2013 16:35, schrieb Christian Franke:
>> mails wrote:
>>> Hello,
>>>
>>> I upgraded smartmontools to smartmontools_5.41 (squeeze-backports) too
>>> see if it solves my problem. I got one single notification after the
>>> installation. After that total silence again :(
>>> /var/log/smartd.log shows only one-liners like before.
>>>
>> Please post these "one-liners".
>> Does smart.log actually contain LOG_INFO and LOG_CRIT messages?
>> (The message "Sending warning via ..." uses LOG_INFO level)
>>
> The lines looks like this
>
> Oct  1 19:27:59 selektos smartd[1687]: Device:
> /dev/disk/by-id/wwn-0x5000c50029ea3503 [SAT], Temperature 35 Celsius
> reached critical limit of 26 Celsius (Min/Max 34/37)
>
>

LOG_INFO messages are missing in this log, this makes further 
diagnostics difficult.

Please run "/usr/sbin/smartd -q onecheck" from root terminal and provide 
its standard output as an attachment.