Menu
▾
▴
Re: [Smartmontools-database] TOSHIBA MK1002TSKB 3.5" SATA 3.0 Gbps HDD
|
From: Victor P. <vp...@ps...> - 2011-11-23 02:15:52
|
Thank you for adding these drives to the database. There's a typo in the "Model Family" field. These are 3.5" drives. ---- smartctl 5.43 2011-11-22 r3484M [x86_64-linux-2.6.18-238.el5] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK.002TSKB Device Model: TOSHIBA MK1002TSKB Serial Number: 5131K17RF LU WWN Device Id: 5 000039 34b7000cb Firmware Version: MT1A User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Nov 23 00:24:40 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 203) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 6749 4 Start_Stop_Count -O--CK 100 100 000 - 5 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 000 - 301 10 Spin_Retry_Count PO--CK 100 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 5 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 193 Load_Cycle_Count -O--CK 100 100 000 - 7 194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 22/33) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 220 Disk_Shift -O---- 100 100 000 - 4119 222 Loaded_Hours -O--CK 100 100 000 - 208 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 94 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error log] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 8 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 28/29 Celsius Lifetime Min/Max Temperature: 22/33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (215) Index Estimated Time Temperature Celsius 216 2011-11-22 16:28 23 **** ... ..(300 skipped). .. **** 39 2011-11-22 21:29 23 **** 40 2011-11-22 21:30 24 ***** 41 2011-11-22 21:31 23 **** 42 2011-11-22 21:32 23 **** 43 2011-11-22 21:33 24 ***** 44 2011-11-22 21:34 24 ***** 45 2011-11-22 21:35 23 **** 46 2011-11-22 21:36 24 ***** ... ..( 48 skipped). .. ***** 95 2011-11-22 22:25 24 ***** 96 2011-11-22 22:26 25 ****** 97 2011-11-22 22:27 24 ***** 98 2011-11-22 22:28 24 ***** 99 2011-11-22 22:29 25 ****** ... ..( 10 skipped). .. ****** 110 2011-11-22 22:40 25 ****** 111 2011-11-22 22:41 24 ***** 112 2011-11-22 22:42 25 ****** 113 2011-11-22 22:43 24 ***** 114 2011-11-22 22:44 25 ****** ... ..( 5 skipped). .. ****** 120 2011-11-22 22:50 25 ****** 121 2011-11-22 22:51 26 ******* ... ..( 10 skipped). .. ******* 132 2011-11-22 23:02 26 ******* 133 2011-11-22 23:03 27 ******** ... ..( 11 skipped). .. ******** 145 2011-11-22 23:15 27 ******** 146 2011-11-22 23:16 28 ********* ... ..( 8 skipped). .. ********* 155 2011-11-22 23:25 28 ********* 156 2011-11-22 23:26 27 ******** ... ..( 12 skipped). .. ******** 169 2011-11-22 23:39 27 ******** 170 2011-11-22 23:40 28 ********* ... ..( 8 skipped). .. ********* 179 2011-11-22 23:49 28 ********* 180 2011-11-22 23:50 27 ******** 181 2011-11-22 23:51 28 ********* ... ..( 24 skipped). .. ********* 206 2011-11-23 00:16 28 ********* 207 2011-11-23 00:17 ? - 208 2011-11-23 00:18 28 ********* ... ..( 4 skipped). .. ********* 213 2011-11-23 00:23 28 ********* 214 2011-11-23 00:24 29 ********** 215 2011-11-23 00:25 29 ********** SCT Error Recovery Control: Read: Disabled Write: Disabled SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0008 4 0 Device-to-host non-data FIS retries 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS ---- On Thu, 2011-11-10 at 11:17 -0800, Victor Payno wrote: > Below are the URL and the smartctl output for the > > TOSHIBA MK1002TSKB 3.5" SATA 3.0 Gbps HDD > > http://storage.toshiba.com/main.aspx?Path=StorageSolutions/Enterprise/MKx001TRKB-2TSKBSeries/MKx001TRKB-2TSKBSeriesSpecifications > > http://storage.toshiba.com/techdocs/MKx001TRKB_2TSKB_Series_Data_Sheet.pdf > > > > # smartctl -i -r ioctl,2 /dev/sda > > smartctl 5.43 2011-10-27 r3462M [x86_64-linux-2.6.18-238.el5] (local build) > Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net > > [inquiry: 12 00 00 00 24 00 ] > scsi_status=0x0, host_status=0x0, driver_status=0x0 > info=0x0 duration=0 milliseconds resid=0 > Incoming data, len=36: > 00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20 > 10 54 4f 53 48 49 42 41 20 4d 4b 31 30 30 32 54 53 > 20 4d 54 31 41 > status=0x0 > [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] > scsi_status=0x0, host_status=0x0, driver_status=0x0 > info=0x0 duration=1 milliseconds resid=0 > Incoming data, len=512 [only first 256 bytes shown]: > 00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 > 10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 35 20 > 20 33 31 4b 31 37 31 46 52 00 00 00 00 00 00 54 4d > 30 41 31 20 20 20 20 4f 54 48 53 42 49 20 41 4b 4d > 40 30 31 32 30 53 54 42 4b 20 20 20 20 20 20 20 20 > 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 > 60 00 00 00 2f 00 40 00 02 00 00 07 00 ff 3f 10 00 > 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 07 00 07 00 > 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 > 90 00 00 00 00 00 00 1f 00 06 1f 04 00 4c 00 40 00 > a0 f8 01 00 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 > b0 3f 20 61 00 61 00 80 00 fe ff 00 00 00 00 00 00 > c0 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 > d0 00 00 00 00 00 40 00 00 00 50 93 03 70 4b cb 00 > e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 > f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > status=0x0 > > REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE > Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN > [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] > scsi_status=0x0, host_status=0x0, driver_status=0x0 > info=0x0 duration=0 milliseconds resid=0 > Incoming data, len=512 [only first 256 bytes shown]: > 00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 > 10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 35 20 > 20 33 31 4b 31 37 31 46 52 00 00 00 00 00 00 54 4d > 30 41 31 20 20 20 20 4f 54 48 53 42 49 20 41 4b 4d > 40 30 31 32 30 53 54 42 4b 20 20 20 20 20 20 20 20 > 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 > 60 00 00 00 2f 00 40 00 02 00 00 07 00 ff 3f 10 00 > 70 3f 00 10 fc fb 00 10 01 ff ff ff 0f 07 00 07 00 > 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 > 90 00 00 00 00 00 00 1f 00 06 1f 04 00 4c 00 40 00 > a0 f8 01 00 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 > b0 3f 20 61 00 61 00 80 00 fe ff 00 00 00 00 00 00 > c0 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 > d0 00 00 00 00 00 40 00 00 00 50 93 03 70 4b cb 00 > e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 > f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > status=0x0 > REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0 > > ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== > 000-015: 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |@..?7.......?...| > 016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 35 20 |.... 5 | > 032-047: 33 31 4b 31 37 31 46 52 00 00 00 00 00 00 54 4d |31K171FR......TM| > 048-063: 41 31 20 20 20 20 4f 54 48 53 42 49 20 41 4b 4d |A1 OTHSBI AKM| > 064-079: 30 31 32 30 53 54 42 4b 20 20 20 20 20 20 20 20 |0120STBK | > 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| > 096-111: 00 00 00 2f 00 40 00 02 00 00 07 00 ff 3f 10 00 |.../.@.......?..| > 112-127: 3f 00 10 fc fb 00 10 01 ff ff ff 0f 07 00 07 00 |?...............| > 128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......| > 144-159: 00 00 00 00 00 00 1f 00 06 1f 04 00 4c 00 40 00 |............L.@.| > 160-175: f8 01 00 00 6b 74 09 7d 63 61 69 74 09 bc 63 61 |....kt.}cait..ca| > 176-191: 3f 20 61 00 61 00 80 00 fe ff 00 00 00 00 00 00 |? a.a...........| > 192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 |.........mpt....| > 208-223: 00 00 00 00 00 40 00 00 00 50 93 03 70 4b cb 00 |.....@...P..pK..| > 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 |...............@| > 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| > 256-271: 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |!...............| > 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 336-351: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...| > 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 432-447: 00 00 20 1c 00 00 00 00 00 00 00 00 1f 10 00 00 |.. .............| > 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 464-479: 00 00 00 00 01 00 80 00 00 00 00 00 00 00 00 00 |................| > 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| > 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 b9 |................| > ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== > > === START OF INFORMATION SECTION === > Device Model: TOSHIBA MK1002TSKB > Serial Number: 5131K17RF > LU WWN Device Id: 5 000039 34b7000cb > Firmware Version: MT1A > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Thu Nov 10 13:55:42 2011 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > > > # smartctl -a /dev/sda > > smartctl 5.43 2011-10-27 r3462M [x86_64-linux-2.6.18-238.el5] (local build) > Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Device Model: TOSHIBA MK1002TSKB > Serial Number: 5131K17RF > LU WWN Device Id: 5 000039 34b7000cb > Firmware Version: MT1A > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Thu Nov 10 13:55:42 2011 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 120) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 203) minutes. > SCT capabilities: (0x003d) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 > 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 > 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 6759 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2 > 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 > 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 > 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13 > 10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 > 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 > 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1 > 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 > 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 29 (Min/Max 22/33) > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 > 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 > 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 > 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 4119 > 222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 8 > 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 > 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 > 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 191 > 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed without error 00% 8 - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > > > > # smartctl -x /dev/sda > > smartctl 5.43 2011-10-27 r3462M [x86_64-linux-2.6.18-238.el5] (local build) > Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Device Model: TOSHIBA MK1002TSKB > Serial Number: 5131K17RF > LU WWN Device Id: 5 000039 34b7000cb > Firmware Version: MT1A > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Thu Nov 10 13:55:43 2011 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 0) The previous self-test routine completed > without error or no self-test has ever > been run. > Total time to complete Offline > data collection: ( 120) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 203) minutes. > SCT capabilities: (0x003d) SCT Status supported. > SCT Error Recovery Control supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE > 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 > 2 Throughput_Performance P-S--- 100 100 050 - 0 > 3 Spin_Up_Time POS--K 100 100 001 - 6759 > 4 Start_Stop_Count -O--CK 100 100 000 - 2 > 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 > 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 > 8 Seek_Time_Performance P-S--- 100 100 050 - 0 > 9 Power_On_Hours -O--CK 100 100 000 - 13 > 10 Spin_Retry_Count PO--CK 100 100 030 - 0 > 12 Power_Cycle_Count -O--CK 100 100 000 - 2 > 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 > 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1 > 193 Load_Cycle_Count -O--CK 100 100 000 - 3 > 194 Temperature_Celsius -O---K 100 100 000 - 29 (Min/Max 22/33) > 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 > 197 Current_Pending_Sector -O--CK 100 100 000 - 0 > 198 Offline_Uncorrectable ----CK 100 100 000 - 0 > 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 > 220 Disk_Shift -O---- 100 100 000 - 4119 > 222 Loaded_Hours -O--CK 100 100 000 - 8 > 223 Load_Retry_Count -O--CK 100 100 000 - 0 > 224 Load_Friction -O---K 100 100 000 - 0 > 226 Load-in_Time -OS--K 100 100 000 - 191 > 240 Head_Flying_Hours P----- 100 100 001 - 0 > ||||||_ K auto-keep > |||||__ C event count > ||||___ R error rate > |||____ S speed/performance > ||_____ O updated online > |______ P prefailure warning > > General Purpose Log Directory Version 1 > SMART Log Directory Version 1 [multi-sector log support] > GP/S Log at address 0x00 has 1 sectors [Log Directory] > SMART Log at address 0x01 has 1 sectors [Summary SMART error log] > SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log] > GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log] > SMART Log at address 0x06 has 1 sectors [SMART self-test log] > GP Log at address 0x07 has 1 sectors [Extended self-test log] > SMART Log at address 0x09 has 1 sectors [Selective self-test log] > GP Log at address 0x10 has 1 sectors [NCQ Command Error log] > GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] > GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] > GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] > GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] > GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] > > SMART Extended Comprehensive Error Log Version: 1 (64 sectors) > No Errors Logged > > SMART Extended Self-test Log Version: 1 (1 sectors) > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed without error 00% 8 - > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > SCT Status Version: 2 > SCT Version (vendor specific): 1 (0x0001) > SCT Support Level: 1 > Device State: Active (0) > Current Temperature: 29 Celsius > Power Cycle Min/Max Temperature: 22/33 Celsius > Lifetime Min/Max Temperature: 22/33 Celsius > Under/Over Temperature Limit Count: 0/0 > SCT Temperature History Version: 2 > Temperature Sampling Period: 1 minute > Temperature Logging Interval: 1 minute > Min/Max recommended Temperature: 5/55 Celsius > Min/Max Temperature Limit: 5/55 Celsius > Temperature History Size (Index): 478 (331) > > Index Estimated Time Temperature Celsius > 332 2011-11-10 05:59 ? - > ... ..(145 skipped). .. - > 0 2011-11-10 08:25 ? - > 1 2011-11-10 08:26 23 **** > 2 2011-11-10 08:27 24 ***** > 3 2011-11-10 08:28 24 ***** > 4 2011-11-10 08:29 25 ****** > 5 2011-11-10 08:30 26 ******* > 6 2011-11-10 08:31 26 ******* > 7 2011-11-10 08:32 31 ************ > 8 2011-11-10 08:33 31 ************ > 9 2011-11-10 08:34 30 *********** > ... ..( 11 skipped). .. *********** > 21 2011-11-10 08:46 30 *********** > 22 2011-11-10 08:47 29 ********** > ... ..(308 skipped). .. ********** > 331 2011-11-10 13:56 29 ********** > > SCT Error Recovery Control: > Read: Disabled > Write: Disabled > > SATA Phy Event Counters (GP Log 0x11) > ID Size Value Description > 0x0001 4 0 Command failed due to ICRC error > 0x0008 4 0 Device-to-host non-data FIS retries > 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET > 0x000b 4 0 CRC errors within host-to-device FIS > 0x000d 4 0 Non-CRC errors within host-to-device FIS > > > > |
