[smartmontools-support] Incorrect values, unknown attributes

[Artem B. <ap...@ng...>]

Please add 171, 172, 174, 234 attributes and fix others like Power_On_Hours, 
Temperature_Celsius if possible.

/tmp/smartctl -dsat+megaraid,22 -a /dev/sg1
smartctl 5.42 2011-09-12 r3416 [i686-linux-2.6.39.3] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     OCZ-AGILITY3
Serial Number:    OCZ-K46CWHEJ5LW1784V
LU WWN Device Id: 5 e83a97 fd2ed45c3
Firmware Version: 2.11
User Capacity:    120 034 123 776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ACS-2 revision 3
Local Time is:    Thu Jul 26 02:04:18 2007 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x03)    Offline data collection activity
                     is in progress.
                     Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 242)    Self-test routine in progress...
                     20% of test remaining.
Total time to complete Offline
data collection:         ( 1256) seconds.
Offline data collection
capabilities:              (0x7f) SMART execute Offline immediate.
                     Auto Offline data collection on/off support.
                     Abort Offline collection upon new
                     command.
                     Offline surface scan supported.
                     Self-test supported.
                     Conveyance Self-test supported.
                     Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                     power-saving mode.
                     Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                     General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      (  48) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x0021)    SCT Status supported.
                     SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
   1 Raw_Read_Error_Rate     0x000f   090   090   050    Pre-fail  Always       
-       33873368
   5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       
-       0
   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       239951232892928
  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       5
171 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       0
172 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      
-       4
177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      
-       0
181 Program_Fail_Cnt_Total  0x0032   000   000   000    Old_age   Always       
-       0
182 Erase_Fail_Count_Total  0x0032   000   000   000    Old_age   Always       
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       0
194 Temperature_Celsius     0x0022   128   129   000    Old_age   Always       
-       128 (0 127 0 129 0)
195 Hardware_ECC_Recovered  0x001c   120   120   000    Old_age   Offline      
-       33873368
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       
-       0
201 Soft_Read_Error_Rate    0x001c   120   120   000    Old_age   Offline      
-       33873368
204 Soft_ECC_Correction     0x001c   120   120   000    Old_age   Offline      
-       33873368
230 Head_Amplitude          0x0013   100   100   000    Pre-fail  Always       
-       170703475179620
231 Temperature_Celsius     0x0013   100   100   010    Pre-fail  Always       
-       0
233 Media_Wearout_Indicator 0x0000   000   000   000    Old_age   Offline      
-       3
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       
-       20
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       
-       20
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       
-       36

SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
     1        0        0  Not_testing
     2        0        0  Not_testing
     3        0        0  Not_testing
     4        0        0  Not_testing
     5        0        0  Not_testing
Selective self-test flags (0x0):
   After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.