Re: [smartmontools-support] Kernel errors on Solaris 11 x64 after moving from 5.39 to 5.40

[Christian F. <Chr...@t-...>]

Peter Radig wrote:
> It's the "-H" that causes the grief.
>
>    

This is the only SMART command which requires ATA output registers. When 
SAT ATA PASS-THROUGH is used this requires proper transfer of sense data.

Both the solaris code and the OS independent SAT code are not changed 
between 5.39 and 5.40. But the number and order of commands issued have 
changed.

For further diagnostics please provide outputs of "smartctl -r ioctl,2 
-H /dev/ice" from 5.39 and 5.40.

Thanks,
Christian