[smartmontools-support] What means Error: ABRT

[Hartmut <fre...@go...>]

Hi Folks,

smartctl drops me the following line. What means "Error. ABRT"?

----------------------
Error 37 occurred at disk power-on lifetime: 4914 hours (204 days + 18 hours)
  When the command that caused the error occurred, the device was
active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 00 03 4f c2 00  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  b0 d4 00 03 4f c2 00 00      01:20:22.563  SMART EXECUTE OFF-LINE IMMEDIATE
  b0 d1 01 01 4f c2 00 00      01:20:22.500  SMART READ ATTRIBUTE
THRESHOLDS [OBS-4]
  b0 d0 01 00 4f c2 00 00      01:20:22.438  SMART READ DATA
  b0 da 00 00 4f c2 00 00      01:20:22.375  SMART RETURN STATUS
  b0 da 00 00 4f c2 00 00      01:20:22.375  SMART RETURN STATUS

Error 36 occurred at disk power-on lifetime: 4912 hours (204 days + 16 hours)
  When the command that caused the error occurred, the device was
active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 51 fe 00 00 00 40  Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 05 fe 00 00 00 40 00      00:00:34.000  SET FEATURES [Enable APM]
  c8 00 08 00 10 00 e0 00      00:00:33.750  READ DMA
  c8 00 08 20 00 00 e0 00      00:00:33.750  READ DMA
  c8 00 08 00 02 00 e0 00      00:00:33.750  READ DMA
  c8 00 08 10 03 00 e0 00      00:00:33.750  READ DMA

----------------------

Thanks a lot
Hartmut