Re: [smartmontools-support] OCZ Vertex 2 SATA II 3.5" with SandForce

[Christian F. <Chr...@t-...>]

Eric Rosenberry wrote:
>
> Thanks for the quick turnaround on this!

Thanks for quick testing!

>
> Success!

r3142, r3143 !-)

>
> FYI- The 3.5 in the version number indicates that it is a 3.5 inch 
> form factor (rather than 2.5 in, etc...)

I see, thanks for the info.

>
> [root@qa01 smartmontools]# ./smartctl --all -B drivedb.h /dev/sdb
> smartctl 5.40 2010-08-24 r3141 [x86_64-unknown-linux-gnu] (local build)
> Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family:     SandForce Driven SSDs
> Device Model:     OCZ-VERTEX2 3.5
> Serial Number:    OCZ-<removed>

BTW: You could use '-q noserial' to suppress serial number output.

> [...]
> Error SMART Error Log Read failed: Input/output error
> Smartctl: SMART Error Log Read Failed
> Error SMART Error Self-Test Log Read failed: Input/output error
> Smartctl: SMART Self Test Log Read Failed

This is due to http://sourceforge.net/apps/trac/smartmontools/ticket/89

'smartctl -x' should read the new logs.

Thanks,
Christian