Menu
▾
▴
[Smartmontools-database]New (old) drive
|
From: Gary E. M. <ge...@re...> - 2004-11-01 23:12:31
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Yo All! Got another drive not in the database. I can read the basic info from it but nothing more. Can not get a selftest to run. Guess it may be time to retire it anyway... # smartctl -a /dev/hda smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: QUANTUM FIREBALLP KA10.1 Serial Number: 362911439096 Firmware Version: A42.0400 User Capacity: 10,110,320,640 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 4 ATA Standard is: ATA/ATAPI-4 T13 1153D revision 15 Local Time is: Mon Nov 1 14:59:41 2004 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled Error SMART Status command failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. # smartctl -t short /dev/hda smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Error SMART Status command failed: Input/output error A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. - -T permissive helps to read info: # smartctl -a -T permissive /dev/hda smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: QUANTUM FIREBALLP KA10.1 Serial Number: 362911439096 Firmware Version: A42.0400 User Capacity: 10,110,320,640 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 4 ATA Standard is: ATA/ATAPI-4 T13 1153D revision 15 Local Time is: Mon Nov 1 15:02:40 2004 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled Error SMART Status command failed: Input/output error i=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 16) minutes. SMART Attributes Data Structure revision number: 9 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0029 100 253 020 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 059 057 020 Pre-fail Always - 5235 4 Start_Stop_Count 0x0032 100 100 008 Old_age Always - 49 5 Reallocated_Sector_Ct 0x0033 100 100 020 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 9 Power_On_Hours 0x0012 066 066 001 Old_age Always - 22635 11 Calibration_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 008 Old_age Always - 49 13 Read_Soft_Error_Rate 0x000b 100 100 023 Pre-fail Always - 0 199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 SMART Error Log Version: 9 No Errors Logged SMART Self-test log structure revision number 9 Warning: ATA Specification requires self-test log structure revision number = 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging # - -T verypermissive still does not allow me to run any self tests: # smartctl -t long -T verypermissive /dev/hda smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Error SMART Status command failed: Input/output error === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Command "Execute SMART Extended self-test routine immediately in off-line mode" failed: Input/output error RGDS GARY - --------------------------------------------------------------------------- Gary E. Miller Rellim 20340 Empire Blvd, Suite E-3, Bend, OR 97701 ge...@re... Tel:+1(541)382-8588 Fax: +1(541)382-8676 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQFBhsLR8KZibdeR3qURAi+DAKCrf4ZyAmK0KFXJpPO+ZjN9fUbaMQCdGpuY T7EqweGIgYlRoHPjtV0JRKE= =zbHy -----END PGP SIGNATURE----- |