From: Manfred S. <man...@gm...> - 2004-09-17 18:08:24
|
Hi, today I tried smartctl on one of my win2000 boxes. using smartmontools 5.33, the self test logs no longer appear. In 5.30, I could see the logs (smartctl -a): smartctl version 5.33 [i386-pc-mingw32] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: MAXTOR 6L040J2 Serial Number: 662207645866 Firmware Version: AR1.0500 User Capacity: 40,027,029,504 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Fri Sep 17 16:45:27 2004 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled <snip> between everything OK <snip> IOCTL_IDE_PASS_THROUGH does not work on your version of Windows Error SMART Error Log Read failed: Function not implemented Smartctl: SMART Error Log Read Failed Error SMART Error Self-Test Log Read failed: Function not implemented Smartctl: SMART Self Test Log Read Failed Device does not support Selective Self Tests/Logging smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: MAXTOR 6L040J2 Serial Number: 662207645866 Firmware Version: AR1.0500 Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Fri Sep 17 16:42:59 2004 CET SMART support is: Available - device has SMART capability. SMART support is: Disabled <snip> between everything OK <snip> SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1477 - # 2 Extended offline Aborted by host 50% 1476 - # 3 Short offline Completed without error 00% 591 - I could reproduce this behavior just on one single win2000 box, the others show log entries with both smartctl versions. Notice the entry "SMART support is: Disabled" I was not able to activate this. The board is an asus p4t-e with some intel components on it, and corresponding drivers from the Intel chipset software installation utility. For the IDE-Controller, an "intel ultra ata storage controller" is installed by the abovementioned utility. I then tried an standard ide driver from microsoft, but I had no luck... Thanks for any hints. Manfred |