[smartmontools-support] Raw_Read_Error_Rate 124918324

[Janos D. <we...@3d...>]

Is this drive about to fail?

My Seagate drive (/dev/ad2) has these numbers:

# smartctl -A /dev/ad2
smartctl version 5.38 [amd64-portbld-freebsd7.1] Copyright (C) 2002-8 Bruce 
Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   066   056   006    Pre-fail  
Always       -       124918324
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  
Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   
Always       -       8
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  
Always       -       0
  7 Seek_Error_Rate         0x000f   089   060   030    Pre-fail  
Always       -       830048470
  9 Power_On_Hours          0x0032   089   089   000    Old_age   
Always       -       9654
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  
Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   
Always       -       107
194 Temperature_Celsius     0x0022   026   046   000    Old_age   
Always       -       26
195 Hardware_ECC_Recovered  0x001a   066   056   000    Old_age   
Always       -       124918324
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   
Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   
Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   188   000    Old_age   
Always       -       13
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   
Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   
Always       -       0

The Extended offline test Completed without error. However, the error log 
shows "ATA Error Count: 14"

This drive is part of a gmirror RAID. The other drive (/dev/ad0) has zero 
Raw_Read_Error_Rate and "No Errors Logged", so I'm wondering if the /dev/ad2 
is about to fail - would you please advise?

-- 
Janos Dohanics