From: Justin P. <jp...@lu...> - 2008-12-16 09:57:47
|
On Tue, 16 Dec 2008, Bruce Allen wrote: > Just a comment that the raw value of Reported_Uncorrect (65536) is exactly > 2^16. This probably indicates that it's a bitmask, with bit 16 set. For all > we know, this bit might indicate 'everything ok'! > > If you are concerned about the drives, I would suggest that you start running > regular extended self-tests. The drive is about 2 1/2 years old but has only > had four short self-tests in its entire life, two of which were when it was 0 > and 1 hour old. > > I would suggest that you run extended self-tests about once per week. > > Cheers, > Bruce Thanks Bruce, here is the second disk in the RAID-1: 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 1703936 Was curious if you knew any details about this value? smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P120 series Device Model: SAMSUNG SP2504C Serial Number: [ .. ] Firmware Version: VT100-48 User Capacity: 250,000,000,000 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Mon Dec 15 18:25:07 2008 EST ==> WARNING: May need -F samsung3 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (4965) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 82) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 37 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 6336 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 478 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 253 253 000 Old_age Always - 0 8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 18227 10 Spin_Retry_Count 0x0032 253 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 270 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 1703936 190 Airflow_Temperature_Cel 0x0022 127 100 000 Old_age Always - 37 194 Temperature_Celsius 0x0022 127 100 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 134229034 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18227 - # 2 Short captive Completed without error 00% 7253 - # 3 Short offline Completed without error 00% 1 - # 4 Short offline Completed without error 00% 0 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |