From: Artem B. <ap...@ng...> - 2008-11-01 12:37:40
|
What you did not understand? I said: I have about 30 errors per 24 hours on different (all) disks. There are 14 disks in PC. Check interval of smartd is 1800 seconds. That means that in other 642 (24*3600/1800*14 - 30) times I've got positive answers from controller. Bruce Allen пишет: > Sorry, I did not understand the answer. > > Do you see this behavior all the time on all ports or only some of the > time on some ports? In other words, do you *sometimes* get sensible > SMART output, or never? > > > On Sat, 1 Nov 2008, Artem Bokhan wrote: > >> And as I can see, this happens more frequently if smart monitoring >> enabled on controller. >> >> Bruce Allen : >>> Next question: do you see this behavior all the time on all ports or >>> only >>> some of the time on some ports? >>> >>> >>> On Fri, 31 Oct 2008, Artem Bokhan wrote: >>> >>> > Yes, you could see that in my message. >>> > > Bruce Allen : >>> > > Do you have 1.46 firmware on the Areca card? >>> > > > > > > On Fri, 31 Oct 2008, Artem Bokhan wrote: >>> > > > > > Smartd rarely reports errors on different disks >>> > > > > > > Oct 31 14:32:40 smartd[10038]: Device: /dev/sg1 >>> [areca_01], failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 15:32:41 smartd[10038]: Device: /dev/sg1 [areca_01], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 16:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 16:32:41 smartd[10038]: Device: /dev/sg1 [areca_02], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 17:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 17:32:41 smartd[10038]: Device: /dev/sg1 [areca_05], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 18:02:41 smartd[10038]: Device: /dev/sg1 [areca_07], >>> failed > > > to >>> > > > read SMART Attribute Data >>> > > > Oct 31 18:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], >>> failed > > > to >>> > > > read SMART Attribute Data >>>>>> __________ >>> > > > > > > The following warning/error was logged by the smartd >>> daemon: >>> > > > > > > Device: /dev/sg1 [areca_06], Read SMART Self-Test Log >>> Failed >>> > > > > > > For details see host's SYSLOG (default: /var/log/messages). >>> > > > > > > You can also use the smartctl utility for further >>> investigation. >>> > > > No additional email messages about this problem will be sent. >>> > > > >>>>>> __________ >>> > > > > > > The following warning/error was logged by the smartd >>> daemon: >>> > > > > > > Device: /dev/sg1 [areca_05], not capable of SMART >>> self-check >>> > > > > > > For details see host's SYSLOG (default: /var/log/messages). >>> > > > > > > You can also use the smartctl utility for further >>> investigation. >>> > > > No additional email messages about this problem will be sent. >>> > > > >>>>>> __________ >>> > > > > > > The following warning/error was logged by the smartd >>> daemon: >>> > > > > > > Device: /dev/sg1 [areca_04], Read SMART Error Log Failed >>> > > > > > > For details see host's SYSLOG (default: /var/log/messages). >>> > > > > > > You can also use the smartctl utility for further >>> investigation. >>> > > > No additional email messages about this problem will be sent. >>> > > > > > > > > > > > > > > > Linux: >>> > > > Ubuntu server LTS 8.x >>> > > > > > > smartd.conf: >>> > > > /dev/sg1 -d areca,1 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,2 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,3 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,4 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,5 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,6 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,7 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,8 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,9 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,10 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,11 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,12 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,13 -a -m pos...@ng... >>> > > > /dev/sg1 -d areca,14 -a -m pos...@ng... >>> > > > > > > > > > arc: >>> > > > Controller Name ARC-1261 >>> > > > Firmware Version V1.46 2008-08-06 >>> > > > BOOT ROM Version V1.45 2008-3-14 >>> > > > Serial Number Y826CAAYAR601248 >>> > > > Unit Serial # >>> > > > Main Processor 800MHz IOP341 C1 >>> > > > CPU ICache Size 32KBytes >>> > > > CPU DCache Size 32KBytes/Write Back >>> > > > CPU SCache Size 512KBytes/Write Back >>> > > > System Memory 256MB/533MHz/ECC >>> > > > Current IP Address 172.16.1.21 >>> > > > > > > smartd: >>> > > > smartd 5.39 2008-10-20 21:15 [x86_64-unknown-linux-gnu] (local >>> > > > build) >>> > > > Copyright (C) 2002-8 by Bruce Allen, >>> > > > http://smartmontools.sourceforge.net >>> > > > > > > smartd comes with ABSOLUTELY NO WARRANTY. This is >>> > > > free software, and you are welcome to redistribute it >>> > > > under the terms of the GNU General Public License >>> > > > Version 2. See http://www.gnu.org for further details. >>> > > > > > > CVS version IDs of files used to build this code are: >>> > > > Module: atacmdnames.cpp revision: 1.17 date: 2008/03/29 >>> > > > uses: atacmdnames.h revision: 1.6 date: 2008/03/04 >>> > > > Module: atacmds.cpp revision: 1.208 date: 2008/10/11 >>> > > > uses: atacmds.h revision: 1.102 date: 2008/10/11 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: extern.h revision: 1.59 date: 2008/08/23 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: scsiata.h revision: 1.6 date: 2008/07/25 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > Module: knowndrives.cpp revision: 1.184 date: 2008/10/20 >>> > > > uses: atacmds.h revision: 1.102 date: 2008/10/11 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: extern.h revision: 1.59 date: 2008/08/23 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: knowndrives.h revision: 1.22 date: 2008/10/08 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > Module: os_linux.cpp revision: 1.122 date: 2008/10/03 >>> > > > uses: atacmds.h revision: 1.102 date: 2008/10/11 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: os_linux.h revision: 1.27 date: 2008/03/04 >>> > > > uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > Module: scsicmds.cpp revision: 1.97 date: 2008/07/25 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: extern.h revision: 1.59 date: 2008/08/23 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > Module: smartd.cpp revision: 1.430 date: 2008/10/13 >>> > > > uses: atacmds.h revision: 1.102 date: 2008/10/11 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: extern.h revision: 1.59 date: 2008/08/23 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: knowndrives.h revision: 1.22 date: 2008/10/08 >>> > > > uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > Module: utility.cpp revision: 1.74 date: 2008/09/13 >>> > > > uses: configure.in revision: 1.145 date: 2008/10/13 >>> > > > uses: int64.h revision: 1.17 date: 2008/03/04 >>> > > > uses: utility.h revision: 1.65 date: 2008/09/17 >>> > > > > > > smartmontools release 5.39 dated 2008/03/10 at 10:44:07 GMT >>> > > > smartmontools build host: x86_64-unknown-linux-gnu >>> > > > smartmontools build configured: 2008/10/21 10:38:24 UTC >>> > > > smartd compile dated Oct 21 2008 at 17:38:32 >>> > > > smartmontools configure arguments: [no arguments given] >>> > > > > > > > > > >>> ------------------------------------------------------------------------- >>> > > > > > > > > > This SF.Net email is sponsored by the Moblin Your >>> Move Developer's >>> > > > challenge >>> > > > Build the coolest Linux based applications with Moblin SDK & win >>> > > > great prizes >>> > > > Grand prize is a trip for two to an Open Source event anywhere >>> in > > > the >>> > > > world >>> > > > http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>>>> _______________________________________________ >>> > > > Smartmontools-support mailing list >>> > > > Sma...@li... >>> > > > >>> https://lists.sourceforge.net/lists/listinfo/smartmontools-support >>> > > > > > > >>> ------------------------------------------------------------------------- >>> > > This SF.Net email is sponsored by the Moblin Your Move >>> Developer's > challenge >>> > Build the coolest Linux based applications with Moblin SDK & win >>> great > prizes >>> > Grand prize is a trip for two to an Open Source event anywhere in >>> the > world >>> > http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>> _______________________________________________ >>> > Smartmontools-support mailing list >>> > Sma...@li... >>> > https://lists.sourceforge.net/lists/listinfo/smartmontools-support >>> > >> >> |