From: Artem B. <ap...@ng...> - 2008-11-01 05:09:52
|
And as I can see, this happens more frequently if smart monitoring enabled on controller. Bruce Allen пишет: > Next question: do you see this behavior all the time on all ports or > only some of the time on some ports? > > > On Fri, 31 Oct 2008, Artem Bokhan wrote: > >> Yes, you could see that in my message. >> >> Bruce Allen ÿÿÿÿÿÿÿÿÿÿ: >>> Do you have 1.46 firmware on the Areca card? >>> >>> >>> On Fri, 31 Oct 2008, Artem Bokhan wrote: >>> >>>> Smartd rarely reports errors on different disks >>>> >>>> Oct 31 14:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], failed to >>>> read SMART Attribute Data >>>> Oct 31 15:32:41 smartd[10038]: Device: /dev/sg1 [areca_01], failed to >>>> read SMART Attribute Data >>>> Oct 31 16:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], failed to >>>> read SMART Attribute Data >>>> Oct 31 16:32:41 smartd[10038]: Device: /dev/sg1 [areca_02], failed to >>>> read SMART Attribute Data >>>> Oct 31 17:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], failed to >>>> read SMART Attribute Data >>>> Oct 31 17:32:41 smartd[10038]: Device: /dev/sg1 [areca_05], failed to >>>> read SMART Attribute Data >>>> Oct 31 18:02:41 smartd[10038]: Device: /dev/sg1 [areca_07], failed to >>>> read SMART Attribute Data >>>> Oct 31 18:32:40 smartd[10038]: Device: /dev/sg1 [areca_01], failed to >>>> read SMART Attribute Data >>>> __________ >>>> >>>> The following warning/error was logged by the smartd daemon: >>>> >>>> Device: /dev/sg1 [areca_06], Read SMART Self-Test Log Failed >>>> >>>> For details see host's SYSLOG (default: /var/log/messages). >>>> >>>> You can also use the smartctl utility for further investigation. >>>> No additional email messages about this problem will be sent. >>>> >>>> __________ >>>> >>>> The following warning/error was logged by the smartd daemon: >>>> >>>> Device: /dev/sg1 [areca_05], not capable of SMART self-check >>>> >>>> For details see host's SYSLOG (default: /var/log/messages). >>>> >>>> You can also use the smartctl utility for further investigation. >>>> No additional email messages about this problem will be sent. >>>> >>>> __________ >>>> >>>> The following warning/error was logged by the smartd daemon: >>>> >>>> Device: /dev/sg1 [areca_04], Read SMART Error Log Failed >>>> >>>> For details see host's SYSLOG (default: /var/log/messages). >>>> >>>> You can also use the smartctl utility for further investigation. >>>> No additional email messages about this problem will be sent. >>>> >>>> >>>> >>>> >>>> Linux: >>>> Ubuntu server LTS 8.x >>>> >>>> smartd.conf: >>>> /dev/sg1 -d areca,1 -a -m pos...@ng... >>>> /dev/sg1 -d areca,2 -a -m pos...@ng... >>>> /dev/sg1 -d areca,3 -a -m pos...@ng... >>>> /dev/sg1 -d areca,4 -a -m pos...@ng... >>>> /dev/sg1 -d areca,5 -a -m pos...@ng... >>>> /dev/sg1 -d areca,6 -a -m pos...@ng... >>>> /dev/sg1 -d areca,7 -a -m pos...@ng... >>>> /dev/sg1 -d areca,8 -a -m pos...@ng... >>>> /dev/sg1 -d areca,9 -a -m pos...@ng... >>>> /dev/sg1 -d areca,10 -a -m pos...@ng... >>>> /dev/sg1 -d areca,11 -a -m pos...@ng... >>>> /dev/sg1 -d areca,12 -a -m pos...@ng... >>>> /dev/sg1 -d areca,13 -a -m pos...@ng... >>>> /dev/sg1 -d areca,14 -a -m pos...@ng... >>>> >>>> >>>> arc: >>>> Controller Name ARC-1261 >>>> Firmware Version V1.46 2008-08-06 >>>> BOOT ROM Version V1.45 2008-3-14 >>>> Serial Number Y826CAAYAR601248 >>>> Unit Serial # >>>> Main Processor 800MHz IOP341 C1 >>>> CPU ICache Size 32KBytes >>>> CPU DCache Size 32KBytes/Write Back >>>> CPU SCache Size 512KBytes/Write Back >>>> System Memory 256MB/533MHz/ECC >>>> Current IP Address 172.16.1.21 >>>> >>>> smartd: >>>> smartd 5.39 2008-10-20 21:15 [x86_64-unknown-linux-gnu] (local build) >>>> Copyright (C) 2002-8 by Bruce Allen, >>>> http://smartmontools.sourceforge.net >>>> >>>> smartd comes with ABSOLUTELY NO WARRANTY. This is >>>> free software, and you are welcome to redistribute it >>>> under the terms of the GNU General Public License >>>> Version 2. See http://www.gnu.org for further details. >>>> >>>> CVS version IDs of files used to build this code are: >>>> Module: atacmdnames.cpp revision: 1.17 date: 2008/03/29 >>>> uses: atacmdnames.h revision: 1.6 date: 2008/03/04 >>>> Module: atacmds.cpp revision: 1.208 date: 2008/10/11 >>>> uses: atacmds.h revision: 1.102 date: 2008/10/11 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: extern.h revision: 1.59 date: 2008/08/23 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: scsiata.h revision: 1.6 date: 2008/07/25 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> Module: knowndrives.cpp revision: 1.184 date: 2008/10/20 >>>> uses: atacmds.h revision: 1.102 date: 2008/10/11 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: extern.h revision: 1.59 date: 2008/08/23 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: knowndrives.h revision: 1.22 date: 2008/10/08 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> Module: os_linux.cpp revision: 1.122 date: 2008/10/03 >>>> uses: atacmds.h revision: 1.102 date: 2008/10/11 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: os_linux.h revision: 1.27 date: 2008/03/04 >>>> uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> Module: scsicmds.cpp revision: 1.97 date: 2008/07/25 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: extern.h revision: 1.59 date: 2008/08/23 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> Module: smartd.cpp revision: 1.430 date: 2008/10/13 >>>> uses: atacmds.h revision: 1.102 date: 2008/10/11 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: extern.h revision: 1.59 date: 2008/08/23 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: knowndrives.h revision: 1.22 date: 2008/10/08 >>>> uses: scsicmds.h revision: 1.67 date: 2008/07/25 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> Module: utility.cpp revision: 1.74 date: 2008/09/13 >>>> uses: configure.in revision: 1.145 date: 2008/10/13 >>>> uses: int64.h revision: 1.17 date: 2008/03/04 >>>> uses: utility.h revision: 1.65 date: 2008/09/17 >>>> >>>> smartmontools release 5.39 dated 2008/03/10 at 10:44:07 GMT >>>> smartmontools build host: x86_64-unknown-linux-gnu >>>> smartmontools build configured: 2008/10/21 10:38:24 UTC >>>> smartd compile dated Oct 21 2008 at 17:38:32 >>>> smartmontools configure arguments: [no arguments given] >>>> >>>> >>>> ------------------------------------------------------------------------- >>>> >>>> >>>> This SF.Net email is sponsored by the Moblin Your Move Developer's >>>> challenge >>>> Build the coolest Linux based applications with Moblin SDK & win >>>> great prizes >>>> Grand prize is a trip for two to an Open Source event anywhere in the >>>> world >>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >>>> _______________________________________________ >>>> Smartmontools-support mailing list >>>> Sma...@li... >>>> https://lists.sourceforge.net/lists/listinfo/smartmontools-support >>>> >> >> >> ------------------------------------------------------------------------- >> >> This SF.Net email is sponsored by the Moblin Your Move Developer's >> challenge >> Build the coolest Linux based applications with Moblin SDK & win >> great prizes >> Grand prize is a trip for two to an Open Source event anywhere in the >> world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> Smartmontools-support mailing list >> Sma...@li... >> https://lists.sourceforge.net/lists/listinfo/smartmontools-support >> |