Re: [smartmontools-support] Database

[Jon H. <jd_...@ya...>]

It does work ok for another drive..

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST380011A
Serial Number:    5JVF42F8
Firmware Version: 8.01
User Capacity:    80,026,361,856 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Fri Oct 10 15:15:47 2008 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

I am using:
smartctl version 5.37 [i386-redhat-linux-gnu]

I believe it is connected directly to the motherboard - but i dont have access to the hardware to confirm that..

-----------------------
N: Jon Hardcastle
E: Jon@eHardcastle.com
'The writing is on the wall...'
-----------------------


--- On Fri, 10/10/08, Justin Piszcz <jp...@lu...> wrote:

> From: Justin Piszcz <jp...@lu...>
> Subject: Re: [smartmontools-support] Database
> To: Jon@eHardcastle.com
> Cc: sma...@li...
> Date: Friday, 10 October, 2008, 3:22 PM
> On Fri, 10 Oct 2008, Jon Hardcastle wrote:
> 
> >>> ATA Standard is:  ATA/ATAPI-7 T13 1532D
> revision 1
> >>> Local Time is:    Fri Oct 10 14:53:29 2008 BST
> >>> SMART support is: Available - device has SMART
> >> capability.
> >>> SMART support is: Enabled
> >>>
> >>> I get the same if i do
> >>>
> >>> smartctl -a -d sat /dev/sdb
> >>>
> >>>
> >>> -----------------------
> >>> N: Jon Hardcastle
> >>> E: Jon@eHardcastle.com
> >>> 'The writing is on the wall...'
> >>> -----------------------
> >>>
> >>
> >> What kernel version?
> >
> > 2.6.24.3-34.fc8
> >
> 
> Does it work OK for other disks?  Are you using
> smartmontools 5.38 or newer?
> Are these disks connected directly to the motherboard?  If
> not, you may have
> issues depending upon what kind of controller they are
> attached to.
> 
> Justin.