Menu
▾
▴
Re: [smartmontools-support] need help! is it doing bad?
|
From: M. A. P. B. <mal...@gm...> - 2008-08-19 06:23:40
|
Thanks for your reply Bruce. I've got seatools for linux, ran the short and long test and it passed. So can i say everything is fine for sure now? I've got a reply of another linux user with this laptop (thus same hdd) saying that he gets the same attributes supposedly failing in linux, but on vista everything is alright. So can i say smart is not beeing accurate? doesn't those number of hours equates to over fifteen billion years? What about those other attributes that are also "old_age", and the raw values are equal or more than WORST. Is that something to worry about ? Thanks again. 2008/8/18 Bruce Allen <ba...@gr...>: > The Attributes that are failing are 'old age' ones. It's strange, since > your disk is only 325 hours old. I suggest that you run the Seagate > 'Seatools' utility on the drive just to confirm that all is OK. > > On Sat, 16 Aug 2008, Marco Aurélio Prawutzki Barbosa wrote: > >> Hi all, >> >> I'm getting "PASSED" on the health status, as well as completing tests >> without failing. >> But then when i run the smartctl --all /dev/sda i get the following: >> ---------- >> [root@localhost laptop-mode]# smartctl --all /dev/sda >> smartctl version 5.38 [i386-redhat-linux-gnu] Copyright (C) 2002-8 Bruce >> Allen >> Home page is http://smartmontools.sourceforge.net/ >> >> === START OF INFORMATION SECTION === >> Model Family: Seagate Momentus 7200.2 >> Device Model: ST9200420ASG >> Serial Number: 5SH0FYCA >> Firmware Version: 3.ADD >> User Capacity: 200,049,647,616 bytes >> Device is: In smartctl database [for details use: -P show] >> ATA Version is: 7 >> ATA Standard is: Exact ATA specification draft version not indicated >> Local Time is: Sat Aug 16 14:59:11 2008 CEST >> SMART support is: Available - device has SMART capability. >> SMART support is: Enabled >> >> === START OF READ SMART DATA SECTION === >> SMART overall-health self-assessment test result: PASSED >> See vendor-specific Attribute list for marginal Attributes. >> >> General SMART Values: >> Offline data collection status: (0x82) Offline data collection activity >> was completed without error. >> Auto Offline Data Collection: >> Enabled. >> Self-test execution status: ( 0) The previous self-test routine >> completed >> without error or no self-test has >> ever >> been run. >> Total time to complete Offline >> data collection: ( 426) seconds. >> Offline data collection >> capabilities: (0x5b) SMART execute Offline immediate. >> Auto Offline data collection >> on/off support. >> Suspend Offline collection upon new >> command. >> Offline surface scan supported. >> Self-test supported. >> No Conveyance Self-test supported. >> Selective Self-test supported. >> SMART capabilities: (0x0003) Saves SMART data before entering >> power-saving mode. >> Supports SMART auto save timer. >> Error logging capability: (0x01) Error logging supported. >> General Purpose Logging supported. >> Short self-test routine >> recommended polling time: ( 2) minutes. >> Extended self-test routine >> recommended polling time: ( 111) minutes. >> SCT capabilities: (0x0035) SCT Status supported. >> SCT Feature Control supported. >> SCT Data Table supported. >> >> SMART Attributes Data Structure revision number: 10 >> Vendor Specific SMART Attributes with Thresholds: >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >> UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail >> Always - 0 >> 3 Spin_Up_Time 0x0003 098 098 085 Pre-fail >> Always - 0 >> 4 Start_Stop_Count 0x0032 100 100 020 Old_age >> Always - 115 >> 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail >> Always - 0 >> 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail >> Always - 17756510 >> 9 Power_On_Hours 0x0032 100 100 000 Old_age >> Always - 325 >> 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail >> Always - 0 >> 12 Power_Cycle_Count 0x0032 100 100 020 Old_age >> Always - 113 >> 187 Reported_Uncorrect 0x0032 100 100 000 Old_age >> Always - 0 >> 189 High_Fly_Writes 0x003a 100 100 000 Old_age >> Always - 0 >> 190 Airflow_Temperature_Cel 0x0022 051 045 045 Old_age >> Always In_the_past 49 (Lifetime Min/Max 25/53) >> 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age >> Always - 0 >> 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age >> Always - 34 >> 193 Load_Cycle_Count 0x0022 097 097 000 Old_age >> Always - 7550 >> 194 Temperature_Celsius 0x001a 049 055 000 Old_age >> Always - 49 (0 22 0 0) >> 195 Hardware_ECC_Recovered 0x0012 055 051 000 Old_age >> Always - 144912673 >> 197 Current_Pending_Sector 0x0010 100 100 000 Old_age >> Offline - 0 >> 198 Offline_Uncorrectable 0x003e 100 100 000 Old_age >> Always - 0 >> 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age >> Offline - 0 >> 200 Multi_Zone_Error_Rate 0x0032 100 253 000 Old_age >> Always - 0 >> 202 TA_Increase_Count 0x0000 100 253 000 Old_age >> Offline - 0 >> 240 Head_Flying_Hours 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 34896609280326 >> 241 Unknown_Attribute 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 634017237 >> 242 Unknown_Attribute 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 1214598 >> 254 Unknown_Attribute 0x0000 100 253 000 Old_age >> Offline - 0 >> >> SMART Error Log Version: 1 >> No Errors Logged >> >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining >> LifeTime(hours) LBA_of_first_error >> # 1 Extended offline Completed without error 00% 324 >> - >> # 2 Short offline Completed without error 00% 2 >> - >> # 3 Short offline Completed without error 00% 1 >> - >> # 4 Short offline Interrupted (host reset) 60% 0 >> - >> >> SMART Selective self-test log data structure revision number 1 >> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> 1 0 0 Not_testing >> 2 0 0 Not_testing >> 3 0 0 Not_testing >> 4 0 0 Not_testing >> 5 0 0 Not_testing >> Selective self-test flags (0x0): >> After scanning selected spans, do NOT read-scan remainder of disk. >> If Selective self-test is pending on power-up, resume after 0 minute >> delay. >> --------- >> >> Is this normal? >> >> 3 Spin_Up_Time 0x0003 098 098 085 Pre-fail >> Always - 0 >> 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail >> Always - 17756510 >> 190 Airflow_Temperature_Cel 0x0022 051 045 045 Old_age >> Always In_the_past 49 (Lifetime Min/Max 25/53) >> 198 Offline_Uncorrectable 0x003e 100 100 000 Old_age >> Always - 0 >> 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age >> Offline - 0 >> >> The raw value is higher or equal the worst, is that normal? >> >> Also: >> >> 240 Head_Flying_Hours 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 34896609280326 >> 241 Unknown_Attribute 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 634017237 >> 242 Unknown_Attribute 0x0000 000 000 000 Old_age >> Offline FAILING_NOW 1214598 >> >> What is that "FAILING NOW"? >> >> This is probably another email asking if things are right or wrong, i >> am sorry for that, but i am worried about this hdd linux bug problem. >> I've fix the load cycles count with hdparm -B 254 and some tweaks (off >> topic), but i'm worried about these smart values as well as the >> temperature. >> >> Thanks in advance, >> -Marco. >> >> ------------------------------------------------------------------------- >> This SF.Net email is sponsored by the Moblin Your Move Developer's >> challenge >> Build the coolest Linux based applications with Moblin SDK & win great >> prizes >> Grand prize is a trip for two to an Open Source event anywhere in the >> world >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ >> _______________________________________________ >> Smartmontools-support mailing list >> Sma...@li... >> https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |