Menu
▾
▴
Re: [smartmontools-support] Another SMARTD Error Messages
|
From: Bruce A. <ba...@gr...> - 2008-04-14 18:21:16
|
Here are a few links: http://www.hardwaresecrets.com/article/29 http://en.wikipedia.org/wiki/Badblocks http://smartmontools.sourceforge.net/badblockhowto.html On Mon, 14 Apr 2008, Ooi Kwan Chen wrote: > > Hi Bruce, > > There are 4 read failures are detected during the long test. Below is the result of '-a' input > > smartctl -a /dev/hda > smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: SAMSUNG SP1604N > Serial Number: S013J20Y428048 > Firmware Version: TM100-30 > User Capacity: 160,041,885,696 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 7 > ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 > Local Time is: Mon Apr 14 14:08:43 2008 PHT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x82) Offline data collection activity > was completed without error. > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 112) The previous self-test completed having > the read element of the test failed. > Total time to complete Offline > data collection: (6000) seconds. > Offline data collection > capabilities: (0x1b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > No Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > No General Purpose Logging support. > Short self-test routine > recommended polling time: ( 1) minutes. > Extended self-test routine > recommended polling time: ( 100) minutes. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 18 > 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5760 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 103 > 5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail Always - 0 > 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 > 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 > 9 Power_On_Half_Minutes 0x0032 098 098 000 Old_age Always - 11929h+36m > 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 > 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 79 > 194 Temperature_Celsius 0x0022 148 091 000 Old_age Always - 30 > 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 118730715 > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 > 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 > 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 > 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 > 200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_age Always - 0 > 201 Soft_Read_Error_Rate 0x000a 100 100 051 Old_age Always - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error > # 1 Extended offline Completed: read failure 00% 11928 316006495 > # 2 Short offline Completed without error 00% 9998 - > # 3 Short offline Completed without error 00% 9976 - > # 4 Extended offline Completed: read failure 00% 9944 316006495 > # 5 Short offline Completed without error 00% 9942 - > # 6 Short offline Completed without error 00% 9920 - > # 7 Short offline Completed without error 00% 9898 - > # 8 Short offline Completed without error 00% 9875 - > # 9 Short offline Completed without error 00% 9853 - > #10 Short offline Completed without error 00% 9830 - > #11 Short offline Completed without error 00% 9808 - > #12 Extended offline Completed: read failure 00% 9787 316006495 > #13 Short offline Completed without error 00% 9786 - > #14 Short offline Completed without error 00% 9763 - > #15 Short offline Completed without error 00% 9741 - > #16 Short offline Completed without error 00% 9718 - > #17 Short offline Completed without error 00% 9696 - > #18 Short offline Completed without error 00% 9673 - > #19 Short offline Completed without error 00% 9651 - > #20 Extended offline Completed: read failure 00% 9630 316006495 > #21 Short offline Completed without error 00% 9628 - > > Device does not support Selective Self Tests/Logging > > > Hope this helps. Appreciate your kind advice > > Thank you for your attention > > - J o h N ? - > > >> Date: Sat, 12 Apr 2008 08:50:14 -0500 >> From: ba...@gr... >> To: neo...@ho... >> CC: sma...@li... >> Subject: Re: [smartmontools-support] Another SMARTD Error Messages >> >>> I have this SMARTD error message from my hard disk in my server >>> >>> SMART Error (OfflineUncorrectableSector) detected >>> >>> smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/ >>> === START OF INFORMATION SECTION ===Device Model: SAMSUNG SP1604NSerial Number: S013J20Y428048Firmware Version: TM100-30User Capacity: 160,041,885,696 bytesDevice is: In smartctl database [for details use: -P show]ATA Version is: 7ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0Local Time is: Fri Apr 11 11:36:49 2008 PHTSMART support is: Available - device has SMART capability.SMART support is: Enabled >>> === START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED >>> General SMART Values:Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining.Total time to complete Offlinedata collection: (6000) seconds.Offline data collectioncapabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. ! >> No Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. No General Purpose Logging support.Short self-test routinerecommended polling time: ( 1) minutes.Extended self-test routinerecommended polling time: ( 100) minutes. >>> SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5760 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 103 5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Half_Minutes 0x0032 098 098 000 Old_age Always - 11860h+14m 10 Spin_Retry_Count ! >> 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 79194 Temperature_Celsius 0x0022 151 091 000 Old_age Always - 29195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 224991196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_a! >> ge Always - 0201 Soft_Read_Erro! >> r_Rate >> 0x000a 100 100 051 Old_age Always - 0 >>> SMART Error Log Version: 1No Errors Logged >>> SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error# 1 Short offline Completed without error 00% 9998 -# 2 Short offline Completed without error 00% 9976 -# 3 Extended offline Completed: read failure 00% 9944 316 006495# 4 Short offline Completed without error 00% 9942 -# 5 Short offline Completed without error 00% 9920 -# 6 Short offline Completed without error 00% 9898 -# 7 Short offline Completed without error 00% 9875 -# 8 Short offline Completed without error 00% 9853 -# 9 Short offline Completed without error 00% 9830 -#10 Short offline Completed without error 00% 9808 -#11 Extended offline ! >> Completed: read failure 00% 9787 316 006495#12 Short offline Completed without error 00% 9786 -#13 Short offline Completed without error 00% 9763 -#14 Short offline Completed without error 00% 9741 -#15 Short offline Completed without error 00% 9718 -#16 Short offline Completed without error 00% 9696 -#17 Short offline Completed without error 00% 9673 -#18 Short offline Completed without error 00% 9651 -#19 Extended offline Completed: read failure 00% 9630 316 006495#20 Short offline Completed without error 00% 9628 -#21 Short offline Completed without error 00% 9606 - >>> Device does not support Selective Self Tests/Logging >>> The error message have been generated from time to time. But when I type smartctl -H /dev/hda, the result is below >>> >>> === START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED >>> Can anyone please tell me whether my hard disk is still working well? >> >> Run an extended self test '-t long' and see if any of the disk sectors are >> not readable. You will have to wait an couple of hours for the self-test >> to complete, then look at the output with '-a'. >> >> Cheers, >> Bruce > > _________________________________________________________________ > Get in touch in an instant. Get Windows Live Messenger now. > http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refresh_getintouch_042008 > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Smartmontools-support mailing list > Sma...@li... > https://lists.sourceforge.net/lists/listinfo/smartmontools-support > |
