Menu
▾
▴
Re: [smartmontools-support] Another SMARTD Error Messages
|
From: Bruce A. <ba...@gr...> - 2008-04-12 13:50:18
|
> I have this SMARTD error message from my hard disk in my server > > SMART Error (OfflineUncorrectableSector) detected > > smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce AllenHome page is http://smartmontools.sourceforge.net/ > === START OF INFORMATION SECTION ===Device Model: SAMSUNG SP1604NSerial Number: S013J20Y428048Firmware Version: TM100-30User Capacity: 160,041,885,696 bytesDevice is: In smartctl database [for details use: -P show]ATA Version is: 7ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0Local Time is: Fri Apr 11 11:36:49 2008 PHTSMART support is: Available - device has SMART capability.SMART support is: Enabled > === START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED > General SMART Values:Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 249) Self-test routine in progress... 90% of test remaining.Total time to complete Offlinedata collection: (6000) seconds.Offline data collectioncapabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. ! No Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. No General Purpose Logging support.Short self-test routinerecommended polling time: ( 1) minutes.Extended self-test routinerecommended polling time: ( 100) minutes. > SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5760 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 103 5 Reallocated_Sector_Ct 0x0033 100 100 011 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Half_Minutes 0x0032 098 098 000 Old_age Always - 11860h+14m 10 Spin_Retry_Count ! 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 79194 Temperature_Celsius 0x0022 151 091 000 Old_age Always - 29195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 224991196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x000a 100 100 051 Old_a! ge Always - 0201 Soft_Read_Erro! r_Rate 0x000a 100 100 051 Old_age Always - 0 > SMART Error Log Version: 1No Errors Logged > SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error# 1 Short offline Completed without error 00% 9998 -# 2 Short offline Completed without error 00% 9976 -# 3 Extended offline Completed: read failure 00% 9944 316 006495# 4 Short offline Completed without error 00% 9942 -# 5 Short offline Completed without error 00% 9920 -# 6 Short offline Completed without error 00% 9898 -# 7 Short offline Completed without error 00% 9875 -# 8 Short offline Completed without error 00% 9853 -# 9 Short offline Completed without error 00% 9830 -#10 Short offline Completed without error 00% 9808 -#11 Extended offline ! Completed: read failure 00% 9787 316 006495#12 Short offline Completed without error 00% 9786 -#13 Short offline Completed without error 00% 9763 -#14 Short offline Completed without error 00% 9741 -#15 Short offline Completed without error 00% 9718 -#16 Short offline Completed without error 00% 9696 -#17 Short offline Completed without error 00% 9673 -#18 Short offline Completed without error 00% 9651 -#19 Extended offline Completed: read failure 00% 9630 316 006495#20 Short offline Completed without error 00% 9628 -#21 Short offline Completed without error 00% 9606 - > Device does not support Selective Self Tests/Logging > The error message have been generated from time to time. But when I type smartctl -H /dev/hda, the result is below > > === START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSED > Can anyone please tell me whether my hard disk is still working well? Run an extended self test '-t long' and see if any of the disk sectors are not readable. You will have to wait an couple of hours for the self-test to complete, then look at the output with '-a'. Cheers, Bruce |
