From: Daniel H. <dh...@st...> - 2008-03-26 20:37:13
|
I install with ./configure make make install on Solaris 10 running X86 The drives I am running this against are sata with a scsi backplane and the last drive is fiber. I read online several comments about the error I was recieving, besides recompiling the source code (which didnt help) I didnt find anything useful. Here is my df -k output /dev/dsk/c3t2d0s0 17452738 15662033 1616178 91% /zeus /dev/dsk/c4t2d0s5 18152978 18017 17953432 1% /data /dev/dsk/c3t13d0s6 76694895 15721664 60206283 21% /zeus2 /dev/dsk/c4t2d0s7 967199 1046 908122 1% /export/home /dev/dsk/c7t5000A72A0000111Ad0s6 17257058 15661833 1422655 92% /zeus4 Here is the program output # smartctl -a /dev/dsk/c3t2d0s0 smartctl version 5.38 [i386-pc-solaris2.10] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ <http://smartmontools.sourceforge.net/> Standard Inquiry (36 bytes) failed [Inappropriate ioctl for device] Retrying with a 64 byte Standard Inquiry Standard Inquiry (64 bytes) failed [Inappropriate ioctl for device] A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. # PROPRIETARY-CONFIDENTIAL INFORMATION INCLUDED This electronic transmission, and any documents attached hereto, may contain confidential, proprietary and/or legally privileged information. The information is intended only for use by the recipient named above. If you received this electronic message in error, please notify the sender and delete the electronic message. Any disclosure, copying, distribution, or use of the contents of information received in error is strictly prohibited, and violators will be pursued legally. |