|
From: Bruce A. <ba...@gr...> - 2008-01-10 09:05:35
|
Hi Jose,
I'm confused. How does enabling/disabling smartd affect the output of
smartctl?
(It would be useful to have the solution to this problem in the mailing
list, so a short explanation would be useful for others who might have
this problem.)
Cheers,
Bruce
On Thu, 10 Jan 2008, Jose wrote:
> Hi,
>
> The issue is solved. The problem was that smartctl shows some garbage
> output, which it shouldn't if smartd is disabled.
>
> Thanks and regards
>
> On Jan 10, 2008 3:42 AM, Bruce Allen <ba...@gr...> wrote:
>
>> Hi Jose,
>>
>> This is pretty weird output -- I am not sure what is going on. Would it
>> be possible for you to boot the system from some type of bootable CD like
>> knoppix that has smartmontools on it, and see if you get the same weird
>> output? If so, then something is strange with the disks. If not, then
>> something is strange with your kernel and/or smartmontools executable.
>>
>> Cheers,
>> Bruce
>>
>> On Tue, 8 Jan 2008, Jose wrote:
>>
>>> Hi,
>>>
>>> I am new to the mailing list but I have previously used smartctl without
>> any
>>> problems. I just checked a
>>> system with two identical Maxtor disks and I get an erroneous output. I
>> am
>>> not sure
>>> where the problem lies.
>>>
>>> The Maxtor disks 6B200M0 seem to be supported by smartmontools but in
>> the
>>> output below I get:
>>>
>>> SMART support is: Disabled
>>>
>>> What should I do to get smartmontools to work properly in this system,
>> with
>>> the Maxtor disks?
>>>
>>> Thanks and kind regards
>>> Jose
>>>
>>>
>> ================================================================================================================================
>>> [root@fedora8 ~]# smartctl -P show /dev/sdb
>>> smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6
>> Bruce
>>> Allen
>>> Home page is http://smartmontools.sourceforge.net/
>>>
>>> Drive found in smartmontools Database. Drive identity strings:
>>> MODEL: Maxtor 6B200M0
>>> FIRMWARE: BANC1BY0
>>> match smartmontools Drive Database entry:
>>> MODEL REGEXP: ^Maxtor
>>>
>> 6(B(30|25|20|16|12|08)0[MPRS]|L(080[MLP]|(100|120)[MP]|160[MP]|200[MPRS]|250[RS]|300[RS]))0$
>>> FIRMWARE REGEXP: .*
>>> MODEL FAMILY: Maxtor DiamondMax 10 family (ATA/133 and SATA/150)
>>> ATTRIBUTE OPTIONS: 009 Power_On_Minutes
>>> [root@s20 ~]# smartctl -P show /dev/sdb
>>>
>>>
>> ===============================================================================================================================
>>>
>>>
>>> [root@fedora8 ~]# smartctl -a /dev/sdb
>>>
>>> smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6
>> Bruce
>>> Allen
>>> Home page is http://smartmontools.sourceforge.net/
>>>
>>> === START OF INFORMATION SECTION ===
>>> Model Family: Maxtor DiamondMax 10 family (ATA/133 and SATA/150)
>>> Device Model: Maxtor 6B200M0
>>> Serial Number: B41W4ZKH
>>> Firmware Version: BANC1BY0
>>> User Capacity: 203,928,109,056 bytes
>>> Device is: In smartctl database [for details use: -P show]
>>> ATA Version is: 7
>>> ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
>>> Local Time is: Tue Jan 8 16:11:01 2008 CET
>>> SMART support is: Available - device has SMART capability.
>>> SMART support is: Disabled
>>>
>>> Warning! SMART Attribute Data Structure error: invalid SMART checksum.
>>> Warning! SMART Attribute Thresholds Structure error: invalid SMART
>> checksum.
>>> === START OF READ SMART DATA SECTION ===
>>> SMART overall-health self-assessment test result: PASSED
>>> See vendor-specific Attribute list for marginal Attributes.
>>>
>>> General SMART Values:
>>> Offline data collection status: (0x35) Offline data collection
>> activity
>>> is in a Reserved state
>>> .
>>> Auto Offline Data Collection: Disabled.
>>> Total time to complete Offline
>>> data collection: (8245) seconds.
>>> Offline data collection
>>> capabilities: (0x22) No SMART execute Offline immediate.
>>> Auto Offline data collection on/off support.
>>> Suspend Offline collection upon new
>>> command.
>>> No Offline surface scan supported.
>>> No Self-test supported.
>>> Conveyance Self-test supported.
>>> No Selective Self-test supported.
>>> SMART capabilities: (0xe953) Saves SMART data before
>> entering
>>> power-saving mode.
>>> Supports SMART auto save timer.
>>> Error logging capability: (0x76) Error logging supported.
>>> General Purpose Logging supported.
>>> Conveyance self-test routine
>>> recommended polling time: ( 97) minutes.
>>>
>>> SMART Attributes Data Structure revision number: 28530
>>> Vendor Specific SMART Attributes with Thresholds:
>>> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
>> UPDATED
>>> WHEN_FAILED RAW_VALUE
>>> 110 Unknown_Attribute 0x656e 034 032 110 Old_age Always
>>> FAILING_NOW 54108873437747
>>> 57 Unknown_Attribute 0x3635 053 052 053 Pre-fail Offline
>>> FAILING_NOW 11133515085110
>>> 83 Unknown_Attribute 0x6961 110 116 097 Pre-fail
>>> Offline - 111482140444461
>>> 115 Unknown_Attribute 0x2022 034 072 034 Old_age Always
>>> FAILING_NOW 78260301231457
>>> 114 Unknown_Attribute 0x6e6f 110 101 111 Pre-fail Always
>>> FAILING_NOW 57373015351330
>>> 55 Unknown_Attribute 0x3736 056 055 054 Old_age
>>> Always - 54108873765683
>>> 10 Spin_Retry_Count 0x4f22 114 105 034 Old_age
>>> Always - 35332068306535
>>> 72 Unknown_Attribute 0x7561 116 101 097 Pre-fail
>>> Offline - 256677870841203
>>> 233 Unknown_Attribute 0x7365 034 032 101 Pre-fail
>> Offline
>>> FAILING_NOW 60705943204403
>>> 55 Unknown_Attribute 0x3738 051 051 056 Old_age Offline
>>> FAILING_NOW 11133447975987
>>> 82 Unknown_Attribute 0x7569 112 101 105 Pre-fail Offline
>>> In_the_past 37879286821497
>>> 34 Unknown_Attribute 0x7950 114 233 080 Old_age
>>> Offline - 71663465392494
>>> 108 Unknown_Attribute 0x6e61 116 105 097 Pre-fail
>>> Offline - 35332337005937
>>> 50 Unknown_Attribute 0x342e 055 053 046 Old_age
>>> Always - 58502575109684
>>> 53 Unknown_Attribute 0x3837 032 010 055 Pre-fail Always
>>> FAILING_NOW 125844394560802
>>> 106 Unknown_Attribute 0x6165 117 034 101 Pre-fail
>> Offline
>>> In_the_past 128047492112928
>>> 45 Unknown_Attribute 0x6147 114 111 071 Pre-fail
>>> Always - 56213109042798
>>> 46 Unknown_Attribute 0x3435 054 052 053 Pre-fail Offline
>>> In_the_past 59602220889907
>>> 50 Unknown_Attribute 0x2037 010 034 055 Pre-fail Always
>>> FAILING_NOW 129121353754964
>>> 101 Unknown_Attribute 0x2022 034 072 034 Old_age Always
>>> FAILING_NOW 49973646620001
>>> 121 Unknown_Attribute 0xe972 110 233 114 Old_age Always
>>> FAILING_NOW 55195163849573
>>> 53 Unknown_Attribute 0x3634 052 051 052 Old_age Offline
>>> FAILING_NOW 55208402564151
>>> 57 Unknown_Attribute 0x0a20 034 072 032 Old_age
>>> Offline - 127979059503721
>>> 101 Unknown_Attribute 0x2022 034 072 034 Old_age Always
>>> FAILING_NOW 49973646620001
>>> 121 Unknown_Attribute 0xe972 110 233 114 Old_age Always
>>> FAILING_NOW 55195163849573
>>> 53 Unknown_Attribute 0x3436 054 054 054 Old_age Always
>>> FAILING_NOW 56320832647730
>>> 49 Unknown_Attribute 0x0a20 034 083 032 Old_age
>>> Offline - 84857622260065
>>> 99 Unknown_Attribute 0x6568 108 034 104 Old_age Offline
>>> In_the_past 121437538230816
>>> 101 Unknown_Attribute 0x2d74 071 097 116 Old_age
>> Offline
>>> FAILING_NOW 37819039772530
>>> 51 Unknown_Attribute 0x2e32 054 050 050 Old_age Always
>>> In_the_past 59580695655729
>>>
>>> Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
>>> SMART Error Log Version: 183
>>> Invalid Error Log index = 0x8a (T13/1321D rev 1c Section 8.41.6.8.2.2gives
>>> valid range from 1 to 5)
>>>
>>> Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
>>> SMART Self-test log structure revision number 35511
>>> Warning: ATA Specification requires self-test log structure revision
>> number
>>> = 1
>>> Num Test_Description Status Remaining
>> LifeTime(hours)
>>> LBA_of_first_error
>>> # 1 Reserved offline Completed without error 20% 42135
>>> -
>>> # 2 Vendor offline Completed without error 40% 29161
>>> -
>>> # 3 Reserved offline Unknown/reserved test status 90% 19611
>>> -
>>> # 4 Vendor offline Completed: handling damage?? 00% 47998
>>> 3955004886
>>> # 5 Reserved offline Self-test routine in progress 140%
>>> 15708 -
>>> # 6 Vendor offline Unknown/reserved test status 10% 31352
>>> -
>>> # 7 Vendor offline Fatal or unknown error 120%
>>> 11822 3679321068
>>> # 8 Vendor offline Completed: read failure 60% 13326
>>> 917655317
>>> # 9 Extended captive Completed: servo/seek failure 140%
>>> 54312 3044941551
>>> #10 Reserved offline Unknown/reserved test status 10% 42025
>>> -
>>> #11 Vendor offline Completed: electrical failure 10% 33532
>>> 2442578247
>>> #12 Vendor offline Completed without error 120%
>>> 50178 -
>>> #13 Reserved offline Unknown/reserved test status 30% 33059
>>> -
>>> #14 Reserved offline Aborted by host 10% 21741
>>> -
>>> #15 Vendor offline Completed: handling damage?? 140%
>>> 58432 3894033971
>>> #16 Reserved offline Completed: handling damage?? 00% 57876
>>> 1696877460
>>> #17 Vendor offline Aborted by host 100%
>>> 31037 -
>>> #18 Vendor offline Completed: unknown failure 30% 64497
>>> 2774460545
>>> #19 Vendor offline Fatal or unknown error 110%
>>> 38474 2928279629
>>> #20 Vendor offline Aborted by host 80% 7934
>>> -
>>> #21 Reserved offline Unknown/reserved test status 80% 25942
>>> -
>>>
>>> Device does not support Selective Self Tests/Logging
>>>
>>
>
|