Menu
▾
▴
[smartmontools-support] udev, 3ware 9650 and smartmontools ...
|
From: <s.c...@wa...> - 2007-08-17 23:28:01
|
Hello I'm running an Ubuntu feisty with udev and 2.6.22 kernel. I've got a 3ware 9650 with 8 Seagate harddrives Unfortunately I can't run smartmontools Might be an udev problem because /dev/tweN or /dev/twaN nodes doesn't exists on my server ... On the smartmontools dev tell that is implemented since 5.33 and I'm running 5.36 So I can't do smartctl --all --device=3ware,0 /dev/tweN ... Doesn't work no more with /dev/sda ... Thanks for your help //san1> /c0 show Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-50 OK - - 256K 2793.91 ON OFF Port Status Unit Size Blocks Serial --------------------------------------------------------------- p0 OK u0 465.76 GB 976773168 9QG1LB6F p1 OK u0 465.76 GB 976773168 9QG0Y4BH p2 OK u0 465.76 GB 976773168 9QG0Z9YY p3 OK u0 465.76 GB 976773168 9QG1KW4W p4 OK u0 465.76 GB 976773168 9QG1N9PJ p5 OK u0 465.76 GB 976773168 9QG1NAX0 p6 OK u0 465.76 GB 976773168 9QG0XSH0 p7 OK u0 465.76 GB 976773168 9QG1MFP9 Name OnlineState BBUReady Status Volt Temp Hours LastCapTest --------------------------------------------------------------------------- bbu On Yes OK OK OK 0 xx-xxx-xxxx //san1> /c0/p0 show status model serial firmware capacity /c0/p0 Status = OK /c0/p0 Model = ST3500630AS /c0/p0 Serial = 9QG1LB6F /c0/p0 Firmware Version = 3.AAK /c0/p0 Capacity = 465.76 GB (976773168 Blocks) #dpkg -l smartmontools smartmontools 5.36-8 control and monitor storage systems using S.M.A.R.T. Regards |