From: larry j. <joh...@dm...> - 2004-03-29 01:24:16
|
On Sat, 27 Mar 2004, [ISO-8859-1] Helmut Schwei=DF wrote: HS> larry johnson wrote: HS> HS> > ... HS> The problem is the new compiler. HS> The good news is: all you need is in the package you pulled HS> There is a ZIP-file called "emx\dev\gnudev2.zip" in it. This file HS> contains four exe-files. HS> Replace the files in your bin-folder with these files. HS> Open "install.doc" in your emx\doc-folder. Search for "Setting HS> environment variables" and check your CONFIG.SYS. HS> After reboot, remove "emxobjs" in your slang\src and rebuild slang. Now HS> slrn should build correct. HS> i did this and still had a bit of trouble but when i deleted an include directory from the set parameter it worked. the gcc3.2.1 install procedure built a command file which set all sorts of things and then called the compiler. apparently the original problem was addressed in the patch - the end of lin= e difference was what kept it from rebuilding the .headers file. i had forgotten that rebuild implied expire so some of the posts dropped off but = i still had a couple that should be marked h and weren't but now are. i certainly do appreciate your help, it is conceivable i would have stumble= d onto the old compiler but it's more likely i would have given up in disgust= =2E --=20 ldj <larry johnson> not EEO, EOO Equal Opportunity Offender Pursuant to US Code, Title 47, Chapter 5, Subchapter II, Sec. 227: Any and all non-solicited commercial e-mail sent to this address is subject to a download and archival fee of $500 US per day. message saved on Mar 28, 2004 at 17:17 Using Pine 4.53 |