Hi,
i want to use siproxd to open my Asterisk server to the public. The Asterisk server is behind a NAT and i cannot forward ports to it. But the Asterisk server is in an VPN together with an server that has an public ip address.
So this is how i want my setup to be:
Asterisk
as SIP --- OpenVPN --- Proxy Server
registrar |
Internet
|
SIP Clients
Is this posible with siproxd? I try to setup it with this configuration:
[root@jupiter ~]# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 94.249.134.17 netmask 255.255.255.0 broadcast 94.249.134.255
inet6 fe80::4042:8dff:feb0:2f42 prefixlen 64 scopeid 0x20<link>
ether 42:42:8d:b0:2f:42 txqueuelen 1000 (Ethernet)
RX packets 26757603 bytes 3029780057 (2.8 GiB)
RX errors 0 dropped 32 overruns 0 frame 0
TX packets 18925600 bytes 47581287242 (44.3 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 1234740 bytes 186405699 (177.7 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1234740 bytes 186405699 (177.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 10.8.0.1 netmask 255.255.0.0 broadcast 10.8.255.255
inet6 fe80::9810:f8ff:fe3c:67c6 prefixlen 64 scopeid 0x20<link>
ether 9a:10:f8:3c:67:c6 txqueuelen 100 (Ethernet)
RX packets 800165 bytes 165082677 (157.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 930041 bytes 150851885 (143.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@jupiter ~]# cat /etc/siproxd.conf
if_inbound = eth0
if_outbound = tap0
host_outbound = 10.8.100.1
sip_listen_port = 5060
daemonize = 0
silence_log = 1
registration_file = /var/lib/siproxd/siproxd_registrations
autosave_registrations = 300
pid_file = /var/run/siproxd/siproxd.pid
rtp_proxy_enable = 1
rtp_port_low = 7070
rtp_port_high = 7089
rtp_timeout = 300
rtp_dscp = 46
sip_dscp = 0
rtp_input_dejitter = 0
rtp_output_dejitter = 0
tcp_timeout = 600
tcp_connect_timeout = 500
tcp_keepalive = 20
debug_level = 0x00000000
debug_port = 0
ua_string = Siproxd-UA
plugindir=/usr/lib/siproxd/
load_plugin=plugin_logcall.la
load_plugin=plugin_fix_bogus_via.la
The output is in the attachment try1.log.
I tryed it also with this configuration:
[root@jupiter ~]# cat /etc/siproxd.conf
if_inbound = eth0
if_outbound = tap0
sip_listen_port = 5060
daemonize = 0
silence_log = 1
registration_file = /var/lib/siproxd/siproxd_registrations
autosave_registrations = 300
pid_file = /var/run/siproxd/siproxd.pid
rtp_proxy_enable = 1
rtp_port_low = 7070
rtp_port_high = 7089
rtp_timeout = 300
rtp_dscp = 46
sip_dscp = 0
rtp_input_dejitter = 0
rtp_output_dejitter = 0
tcp_timeout = 600
tcp_connect_timeout = 500
tcp_keepalive = 20
debug_level = 0x00000000
debug_port = 0
ua_string = Siproxd-UA
plugindir=/usr/lib/siproxd/
load_plugin=plugin_logcall.la
load_plugin=plugin_fix_bogus_via.la
The output is in the attachment try2.log.
Thanks
Maximilian Ruta |
