Antwort: [Siproxd-users] siproxd zyxel2000W problems

[<Mat...@mw...>]

This does not seem to be a problem with your phone. I have exactly the 
same problem with the xten softphone and sipgate, but not with 1und1:
I can call the 10000 number - ok
I can be called with my sipgate number from outside
But I cannot place a call. Get the error message from sipgate.
No problems with 1und1 with the same configuration.

Mathias Wohlfarth EDV-Beratung
Thomas-Mann-Str.1
53111 Bonn
Tel.    0172 / 53 45 591
        01801 / 777 555 33 01
Fax     0228 / 9469181
Email   mat...@mw...




Peter Koellner <pe...@as...>
Gesendet von: sip...@li...
10.01.2005 17:20
Bitte antworten an siproxd-users
 
        An:     Sip...@li...
        Kopie: 
        Thema:  [Siproxd-users] siproxd zyxel2000W problems


hi!

I got a Zyxel Prestige 2000W WLAN VOIP phone here that I am trying to get
to work with a sipgate account. Now the phones firmware is pretty 
primitive
with not much configuration options, and it did not work with the local
network setup, so I installed siproxd 0.5.9 (now the 0.5.10 snapshot as of
January 10th).
I am able to make calls to other softphones in the local net, but 
connections
to or from the outside fail with the following symptoms:

1. STUN ENABLED

-ringing the external phone works, ringing in from the external phone 
works,
  but audio does not work in either direction

2. STUN DISABLED

-ringing in works, with external audio source arriving, but the VOIP 
phones
audio source remains mute.
-ringing out to the landline phone gives an error message playback
  from sipgate
-calling sipgate's 10000 test number connects to the welcome message.

The network setup looks like this:

gateway:

Fedora Linux Box with kernel 2.6.7 and iptables NAT/firewall, 
ports 5060, 5061, 10000 and 7070:7079 open.
Q-DSL internet connection

local network: Netgear ME102 WLAN router

There also is an independent Asterisk installation on the gateway, so I 
use 
port 5061 for the outgoing proxy, but changing that to 5060 does not make 
any difference.

I am not too sure where to look for problems there. There are absolutely 
no
log messages from the phone itself, and I bet there are lots of bugs in
the firmware, but since local sip calls work I guess there must
be something going wrong with the RTP relaying. There is no restriction
on outgoing packets, so I do not think it is a firewall problem.

... and now I am totally confused because calls in the local network
do not work any more with the same configuration I tried last time...

Does anybody have any experience with the Zyxel phone? Or any suggestions
as how to pinpoint the problem?

-- 
peter koellner <pe...@as...>


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Siproxd-users mailing list
Sip...@li...
https://lists.sourceforge.net/lists/listinfo/siproxd-users