siproxd does not seem to masq. incoming calls correctly, if the SIP server and the RTP stream come from different IPs.
+++ tcpdump: ppp0 +++
15:57:12.255421 IP 80.73.111.90.5060 > 62.78.18.33.5060: UDP, length: 327
15:57:15.395766 IP 80.73.111.90.5060 > 62.78.18.33.5060: UDP, length: 842
15:57:15.439478 IP 62.78.18.33.5060 > 80.73.111.90.5060: UDP, length: 470
15:57:15.553397 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
15:57:15.567626 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
15:57:15.586401 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
+++ /// +++
On the internal interface the RTP stream is only masqued to the internal proxy IP, but the port is not masqued (stays: 19148 in this case instead of 707x).
Do you have any hints, how to fix that misbehaviour?
- Florian -
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Can you provide a debug log of siproxd (debuglevel=-1) for such a case? Please mail the file directly to my users.sourceforge.net email address (usually the tend to be large...).
Regards,
/Thomas
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
siproxd does not seem to masq. incoming calls correctly, if the SIP server and the RTP stream come from different IPs.
+++ tcpdump: ppp0 +++
15:57:12.255421 IP 80.73.111.90.5060 > 62.78.18.33.5060: UDP, length: 327
15:57:15.395766 IP 80.73.111.90.5060 > 62.78.18.33.5060: UDP, length: 842
15:57:15.439478 IP 62.78.18.33.5060 > 80.73.111.90.5060: UDP, length: 470
15:57:15.553397 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
15:57:15.567626 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
15:57:15.586401 IP 195.71.163.5.19148 > 80.73.111.90.7073: UDP, length: 172
+++ /// +++
On the internal interface the RTP stream is only masqued to the internal proxy IP, but the port is not masqued (stays: 19148 in this case instead of 707x).
Do you have any hints, how to fix that misbehaviour?
- Florian -
Can you provide a debug log of siproxd (debuglevel=-1) for such a case? Please mail the file directly to my users.sourceforge.net email address (usually the tend to be large...).
Regards,
/Thomas
Dear Thomas,
did you receive my E-Mail from yesterday with the detailed debug information?
Best regards,
- Florian -
yes, got it. I hope I'll have some time over the weekend to look at it.
Regards,
/Thomas
Dear Thomas,
do you already have any news regarding this issue?
Best regards,
Florian