Re: [Sipp-users] Issue using Sipp with Proxy

[Šindelka P. <sin...@tt...>]

Not sure I understand what you are doing.

If you really use the embedded scenarios, do you just change the IP address of the machine running the UAS script during the execution of the script, and the script sends the next packet from the new address? Or you haven't reached that point so far, and you are talking about the ACK related to the initial INVITE?

In any case, SIPp running an UAC scenario normally sends to the address on the command line and if running an UAS scenario, it responds to the address from which the initial request has arrived. It does not automatically respect record-route or its absence. If you want to change the remote address during a call, you have to use ereg to extract the address from the Contact header in the received message and use setdest<http://sipp.sourceforge.net/doc/reference.html#setdest> to make SIPp use that address as a destination for the subsequent messages in the call. It means that to make the ACK be sent to a different destination socket than the preceding INVITE, you cannot use the embedded UAC scenario and you have to create your own one.

Pavel

Dne 8.10.2018 v 2:57 Julian Kovacek napsal(a):
Hello,

I’m having an issue simulating a scenario from rfc: https://tools.ietf.org/html/rfc3665#section-3.7
Were SIPP is Alice(UAC) and Bob(UAS).

The Problem:
My Ack is being sent to the proxy from Alice. It should be sent to Bob from Alice.

My Setup:
Version: sipp-3.5.2
uac: sipp 10.2.1.30 -m 1 -sn uac -s 311234567890 -d 5000
uas:  sipp 10.2.1.30  -sn uas

Is there a config or argument I am missing?





_______________________________________________
Sipp-users mailing list
Sip...@li...<mailto:Sip...@li...>
https://lists.sourceforge.net/lists/listinfo/sipp-users