From: Sakharam T. <sak...@ou...> - 2014-07-13 09:31:22
|
Hi Pual, Yes, Client side may have the problem. I am using following setup, can you please try this , SIPP Server(Ububtu-192.168.163.135)<=======================> Microsip (Windows 7- 192.168.163.2) Best regards, Sakharam Thorat --- Original Message --- From: "Paul Miller" <idk...@si...> Sent: July 13, 2014 1:30 PM To: "Sakharam Thorat" <sak...@ou...> Cc: "sipp-users" <sip...@li...> Subject: Re: [Sipp-users] verifyauth consistently reporting false I have included a the steps I took on the download and recompile with openssl and it makes no difference still the same. Next avenue to investigate is the client side. I am typically using SIP Inspector Pro 2.40 as my UAC for this test although I have tried zoiper along the way at the time with the same outcome. Both SIP Inspector and SIPp I have used against multiple UAS registrars and never had a problem so I am dubious that this the problem but it would seem to be the most obvious next area to check. just in case there is something strange it what I have done here is the d/l through to sipp -v (without the compile which completed with no errors) I move the whole directory from /usr/src to .opt which is where I have a few different versions of sipp to choose from root@telecom-tools-2014:/usr/src# wget https://github.com/SIPp/sipp/archive/3.4.0.tar.gz --2014-07-13 19:29:17-- https://github.com/SIPp/sipp/archive/3.4.0.tar.gz Resolving github.com (github.com)... 192.30.252.130 Connecting to github.com (github.com)|192.30.252.130|:443... connected. HTTP request sent, awaiting response... 302 Found Location: https://codeload.github.com/SIPp/sipp/tar.gz/3.4.0 [following] --2014-07-13 19:29:19-- https://codeload.github.com/SIPp/sipp/tar.gz/3.4.0 Resolving codeload.github.com (codeload.github.com)... 192.30.252.146 Connecting to codeload.github.com (codeload.github.com)|192.30.252.146|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 431495 (421K) [application/x-gzip] Saving to: â3.4.0.tar.gzâ 100%[==============================================================>] 431,495 237KB/s in 1.8s 2014-07-13 19:29:21 (237 KB/s) - â3.4.0.tar.gzâ saved [431495/431495] root@telecom-tools-2014:/usr/src# gunzip 3.4.0.tar.gz root@telecom-tools-2014:/usr/src# tar -xvf 3.4.0.tar sipp-3.4.0/ sipp-3.4.0/.gitignore sipp-3.4.0/LICENSE.txt sipp-3.4.0/Makefile.am sipp-3.4.0/Makefile.in sipp-3.4.0/README.txt sipp-3.4.0/THANKS sipp-3.4.0/aclocal.m4 sipp-3.4.0/auto-generate-files.sh sipp-3.4.0/config.guess sipp-3.4.0/config.sub sipp-3.4.0/configure sipp-3.4.0/configure.ac sipp-3.4.0/cpplint.py sipp-3.4.0/depcomp sipp-3.4.0/include/ sipp-3.4.0/include/actions.hpp sipp-3.4.0/include/call.hpp sipp-3.4.0/include/comp.h sipp-3.4.0/include/config.h.in sipp-3.4.0/include/deadcall.hpp sipp-3.4.0/include/infile.hpp sipp-3.4.0/include/listener.hpp sipp-3.4.0/include/logger.hpp sipp-3.4.0/include/md5.h sipp-3.4.0/include/message.hpp sipp-3.4.0/include/milenage.h sipp-3.4.0/include/opentask.hpp sipp-3.4.0/include/prepare_pcap.h sipp-3.4.0/include/reporttask.hpp sipp-3.4.0/include/rijndael.h sipp-3.4.0/include/rtpstream.hpp sipp-3.4.0/include/scenario.hpp sipp-3.4.0/include/screen.hpp sipp-3.4.0/include/send_packets.h sipp-3.4.0/include/sip_parser.hpp sipp-3.4.0/include/sipp.hpp sipp-3.4.0/include/socket.hpp sipp-3.4.0/include/socketowner.hpp sipp-3.4.0/include/sslcommon.h sipp-3.4.0/include/stat.hpp sipp-3.4.0/include/strings.hpp sipp-3.4.0/include/task.hpp sipp-3.4.0/include/time.hpp sipp-3.4.0/include/variables.hpp sipp-3.4.0/include/watchdog.hpp sipp-3.4.0/include/xp_parser.h sipp-3.4.0/install-sh sipp-3.4.0/missing sipp-3.4.0/pcap/ sipp-3.4.0/pcap/dtmf_2833_0.pcap sipp-3.4.0/pcap/dtmf_2833_1.pcap sipp-3.4.0/pcap/dtmf_2833_2.pcap sipp-3.4.0/pcap/dtmf_2833_3.pcap sipp-3.4.0/pcap/dtmf_2833_4.pcap sipp-3.4.0/pcap/dtmf_2833_5.pcap sipp-3.4.0/pcap/dtmf_2833_6.pcap sipp-3.4.0/pcap/dtmf_2833_7.pcap sipp-3.4.0/pcap/dtmf_2833_8.pcap sipp-3.4.0/pcap/dtmf_2833_9.pcap sipp-3.4.0/pcap/dtmf_2833_pound.pcap sipp-3.4.0/pcap/dtmf_2833_star.pcap sipp-3.4.0/pcap/g711a.pcap sipp-3.4.0/sipp.1 sipp-3.4.0/sipp.dtd sipp-3.4.0/src/ sipp-3.4.0/src/actions.cpp sipp-3.4.0/src/auth.c sipp-3.4.0/src/call.cpp sipp-3.4.0/src/comp.c sipp-3.4.0/src/deadcall.cpp sipp-3.4.0/src/fortune.cpp sipp-3.4.0/src/infile.cpp sipp-3.4.0/src/listener.cpp sipp-3.4.0/src/logger.cpp sipp-3.4.0/src/md5.c sipp-3.4.0/src/message.cpp sipp-3.4.0/src/milenage.c sipp-3.4.0/src/opentask.cpp sipp-3.4.0/src/prepare_pcap.c sipp-3.4.0/src/reporttask.cpp sipp-3.4.0/src/rijndael.c sipp-3.4.0/src/rtpstream.cpp sipp-3.4.0/src/scenario.cpp sipp-3.4.0/src/screen.cpp sipp-3.4.0/src/send_packets.c sipp-3.4.0/src/sip_parser.cpp sipp-3.4.0/src/sipp.cpp sipp-3.4.0/src/sipp_unittest.cpp sipp-3.4.0/src/socket.cpp sipp-3.4.0/src/socketowner.cpp sipp-3.4.0/src/sslinit.c sipp-3.4.0/src/sslthreadsafe.c sipp-3.4.0/src/stat.cpp sipp-3.4.0/src/strings.cpp sipp-3.4.0/src/task.cpp sipp-3.4.0/src/time.cpp sipp-3.4.0/src/variables.cpp sipp-3.4.0/src/watchdog.cpp sipp-3.4.0/src/xp_parser.c root@telecom-tools-2014:/usr/src# cd sipp-3.4.0/ root@telecom-tools-2014:/usr/src/sipp-3.4.0# root@telecom-tools-2014:/usr/src/sipp-3.4.0# root@telecom-tools-2014:/usr/src/sipp-3.4.0# root@telecom-tools-2014:/usr/src/sipp-3.4.0# ./configure --with-pcap --with-openssl checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for initscr in -lcurses... yes checking for pthread_mutex_init in -lpthread... yes checking for library containing dlopen... -ldl checking for library containing dlerror... none required checking for library containing dlsym... none required checking for library containing inet_addr... none required checking for library containing inet_ntoa... none required checking for library containing pthread_mutex_init... none required checking for library containing pthread_mutex_destroy... none required checking for library containing pthread_mutex_lock... none required checking for library containing pthread_mutex_unlock... none required checking for library containing pthread_self... none required checking for library containing pthread_cancel... -lpthread checking for library containing pthread_join... none required checking for library containing pthread_attr_init... none required checking for library containing pthread_attr_setstacksize... none required checking for library containing pthread_create... none required checking for library containing pthread_attr_destroy... none required checking for library containing pthread_setschedparam... none required checking for library containing pthread_setcancelstate... none required checking for library containing pthread_setcanceltype... none required checking for library containing pthread_exit... none required checking for library containing pthread_sigmask... none required checking for library containing floor... -lm checking for library containing pow... none required checking for library containing htons... none required checking for library containing ntohs... none required checking for library containing bind... none required checking for library containing freeaddrinfo... none required checking for library containing getaddrinfo... none required checking for library containing listen... none required checking for library containing recvfrom... none required checking for library containing shutdown... none required checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking openssl/md5.h usability... yes checking openssl/md5.h presence... yes checking for openssl/md5.h... yes checking openssl/bio.h usability... yes checking openssl/bio.h presence... yes checking for openssl/bio.h... yes checking openssl/err.h usability... yes checking openssl/err.h presence... yes checking for openssl/err.h... yes checking openssl/rand.h usability... yes checking openssl/rand.h presence... yes checking for openssl/rand.h... yes checking openssl/ssl.h usability... yes checking openssl/ssl.h presence... yes checking for openssl/ssl.h... yes checking openssl/x509v3.h usability... yes checking openssl/x509v3.h presence... yes checking for openssl/x509v3.h... yes checking for SSL_library_init in -lssl... yes checking for CRYPTO_num_locks in -lcrypto... yes checking pcap.h usability... yes checking pcap.h presence... yes checking for pcap.h... yes checking for library containing pcap_open_offline... -lpcap checking for library containing pcap_next... none required checking for library containing pcap_next_ex... none required checking for library containing pcap_close... none required checking linux/version.h usability... yes checking linux/version.h presence... yes checking for linux/version.h... yes checking for Linux epoll(7) interface... yes checking for size_t... yes checking for working alloca.h... yes checking for alloca... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking for unistd.h... (cached) yes checking for stdbool.h that conforms to C99... yes checking for _Bool... yes checking for inline... inline checking for pid_t... yes checking for size_t... (cached) yes checking for ssize_t... yes checking for uint16_t... yes checking for uint32_t... yes checking for uint8_t... yes checking vfork.h usability... no checking vfork.h presence... no checking for vfork.h... no checking for fork... yes checking for vfork... yes checking for working fork... yes checking for working vfork... (cached) yes checking for alarm... yes checking for dup2... yes checking for floor... yes checking for gethostname... yes checking for gettimeofday... yes checking for inet_ntoa... yes checking for memmove... yes checking for memset... yes checking for pow... yes checking for regcomp... yes checking for socket... yes checking for sqrt... yes checking for strcasecmp... yes checking for strchr... yes checking for strcspn... yes checking for strdup... yes checking for strerror... yes checking for strncasecmp... yes checking for strrchr... yes checking for strstr... yes checking for strtol... yes checking for strtoul... yes checking for strtoull... yes checking that generated files are newer than configure... done configure: creating ./config.status config.status: creating Makefile config.status: creating include/config.h config.status: executing depfiles commands root@telecom-tools-2014:/usr/src/sipp-3.4.0# root@telecom-tools-2014:/usr/src/sipp-3.4.0# ---------- COMPILE ----------- then....... root@telecom-tools-2014:/opt/sipp-3.4.0# cd /opt/sipp-3.4.0/ root@telecom-tools-2014:/opt/sipp-3.4.0# ./sipp -v SIPp v3.4.0-TLS-PCAP-RTPSTREAM built Jul 13 2014, 19:37:24. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Author: see source files. root@telecom-tools-2014:/opt/sipp-3.4.0# cd /opt/common/scenarios/Registration/ root@telecom-tools-2014:/opt/common/scenarios/Registration# /opt/sipp-3.4.0/sipp -sn uas -sf reg_auth.xml -inf reg.inf -m 1 -p 5060 -i 192.168.0.220 -trace_logs -trace_msg -trace_err Warning: open file limit > FD_SETSIZE; limiting max. # of open files to FD_SETSIZE = 1024 Thanks Paul . On Sun, Jul 13, 2014 at 5:54 PM, Sakharam Thorat < sak...@ou...> wrote: > I recompiled without openssl and tested, working fine for me. > > > Best regards, > Sakharam Thorat > > --- Original Message --- > > From: "Sakharam Thorat" <sak...@ou...> > Sent: July 13, 2014 11:11 AM > To: "Paul Miller" <idk...@si...> > > Cc: "sipp-users" <sip...@li...> > Subject: Re: [Sipp-users] verifyauth consistently reporting false > > Hi Paul, > > URL-» https://github.com/SIPp/sipp/archive/3.4.0.tar.gz > Extract and run this to install > ./configure --with-pcap --with-openssl; make > > To use veryfiauth in SIPP, i think SIPP should be compiled with opelssl. > > Best regards, > Sakharam Thorat > > --- Original Message --- > > From: "Paul Miller" <idk...@si...> > Sent: July 13, 2014 9:40 AM > To: "Sakharam Thorat" <sak...@ou...> > Cc: "sipp-users" <sip...@li...> > Subject: Re: [Sipp-users] verifyauth consistently reporting false > > Hi Sakharam, > I appreciate the time you took to give this a shot for me. > I have copied your scenario and inf file verbatim and still I have a > problem, I then decided it must be a version thing and I have tried to get > the same version you indicated and I cannot find it, can you provide the > RURL to the source tar.gz file that you have successfully used here so I > can compile and try that specific version? > > The sipp -v from the last version I used is this: > SIPp v3.4.0-RTPSTREAM built Jul 13 2014, 15:07:02. > > And in case there is something I am not seeing here is my message output. > > > ----------------------------------------------- 2014-07-13 > 15:52:03.825450 > UDP message received [313] bytes : > > REGISTER sip:test.example.com SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.65:5060;branch=z9hG4bK90 > From: <sip:10...@te...>;tag=24de4a5dbe4ef > To: <sip:10...@te...> > Call-ID: 8@192.168.0.65 > CSeq: 1 REGISTER > Max-Forwards: 70 > Contact: <sip:1000@192.168.0.65:5060;transport=UDP> > Content-Length: 0 > > > ----------------------------------------------- 2014-07-13 > 15:52:03.826879 > UDP message sent (412 bytes): > > SIP/2.0 401 Authorization Required > Via: SIP/2.0/UDP 192.168.0.65:5060;branch=z9hG4bK90 > From: <sip:10...@te...>;tag=24de4a5dbe4ef > To: <sip:10...@te...>;tag=4692SIPpTag011 > Call-ID: 8@192.168.0.65 > CSeq: 1 REGISTER > Contact: <sip:192.168.0.220:5060;transport=UDP> > WWW-Authenticate: Digest realm="test.example.com", > nonce="47ebe028cda119c35d4877b383027d28da013815" > Content-Length: 0 > > > ----------------------------------------------- 2014-07-13 > 15:52:03.834364 > UDP message received [511] bytes : > > REGISTER sip:test.example.com SIP/2.0 > Via: SIP/2.0/UDP 192.168.0.65:5060;branch=z9hG4bK93 > From: <sip:10...@te...>;tag=24de4a5dbe4ef > To: <sip:10...@te...> > Call-ID: 8@192.168.0.65 > CSeq: 2 REGISTER > Max-Forwards: 70 > Contact: <sip:1000@192.168.0.65:5060;transport=UDP> > Authorization: Digest username="1000",realm="test.example.com > ",nonce="47ebe028cda119c35d4877b383027d28da013815",uri="sip: > test.example.com > ",response="8bb23fa285671ad103a1725d7034f72d",algorithm=MD5 > Content-Length: 0 > > > > > --------------------------------------------------------------------------------------------------------------------------------------------- > > Thanks once again > > Paul > > > > > > On Sat, Jul 12, 2014 at 10:34 PM, Sakharam Thorat < > sak...@ou...> wrote: > > > Hi Paul, > > You getting false becuase of this issue " > https://github.com/SIPp/sipp/issues/62", I think this is now fixed. > > I tried following with SIPP 3.4.0, and worked for me . > > *SIPP version-* SIPp v3.4.0-TLS-PCAP-RTPSTREAM built Jul 12 2014, > 03:14:38. > *SIPP Command -*/home/test/Desktop/sipp/sipp-3.4.0/sipp -sn uas -sf > reg_auth.xml -inf reg.inf -m 1 -p 5060 -trace_msg -trace_err > *reg_auth.xml-* > > > <?xml version="1.0" encoding="ISO-8859-1" ?> > <!DOCTYPE scenario SYSTEM "sipp.dtd"> > > <scenario name="Basic UAS registrar with authentication"> > > <label id="badauth"/> > <recv request="REGISTER" /> > <send><![CDATA[ > > SIP/2.0 401 Authorization Required > [last_Via:] > [last_From:] > [last_To:];tag=[pid]SIPpTag01[call_number] > [last_Call-ID:] > [last_CSeq:] > Contact: <sip:[local_ip]:[local_port];transport=[transport]> > WWW-Authenticate: Digest realm="test.example.com", > nonce="47ebe028cda119c35d4877b383027d28da013815" > Content-Length: [len] > > ]]> > </send> > <recv request="REGISTER" > > <action> > > <verifyauth assign_to="authvalid" username="[field0]" > password="[field1]" /> > <log message="authvalid=[$authvalid]"/> > </action> > </recv> > > <nop hide="true" test="authvalid" next="goodauth" /> > <nop hide="true" next="badauth" /> > > <label id="goodauth"/> > <send> > <![CDATA[ > > SIP/2.0 200 OK > [last_Via:] > [last_From:] > [last_To:];tag=[call_number] > [last_Call-ID:] > [last_CSeq:] > Contact: <sip:[local_ip]:[local_port];transport=[transport]> > Content-Length: 0 > Expires: 3600 > > ]]> > </send> > > > <!-- definition of the response time repartition table (unit is ms) --> > <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/> > > <!-- definition of the call length repartition table (unit is ms) --> > <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/> > > </scenario> > > *reg.inf-* > > SEQUENTIAL > 1000;1000; > > trace_msg- > > ----------------------------------------------- 2014-07-12 03:20:04.761503 > UDP message received [511] bytes : > > REGISTER sip:192.168.43.2 SIP/2.0 > > Via: SIP/2.0/UDP 192.168.43.8:5060 > ;rport;branch=z9hG4bKPj51ee5d73f3134729bf793c267be1429b > > Max-Forwards: 70 > > From: <sip:1000@192.168.43.2>;tag=c951e08fa39747a6acd4211c07d931b8 > > To: <sip:1000@192.168.43.2> > > Call-ID: c687ec6c8df3448cb3611419bb28a239 > > CSeq: 30665 REGISTER > > User-Agent: MicroSIP/3.3.27 > > Contact: <sip:1000@192.168.43.8:5060;ob> > > Expires: 300 > > Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, > REFER, MESSAGE, OPTIONS > > Content-Length: 0 > > > > > ----------------------------------------------- 2014-07-12 03:20:04.761954 > UDP message sent (479 bytes): > > SIP/2.0 401 Authorization Required > > Via: SIP/2.0/UDP 192.168.43.8:5060 > ;rport;branch=z9hG4bKPj51ee5d73f3134729bf793c267be1429b > > From: <sip:1000@192.168.43.2>;tag=c951e08fa39747a6acd4211c07d931b8 > > To: <sip:1000@192.168.43.2>;tag=1777SIPpTag011 > > Call-ID: c687ec6c8df3448cb3611419bb28a239 > > CSeq: 30665 REGISTER > > Contact: <sip:127.0.1.1:5060;transport=UDP> > > WWW-Authenticate: Digest realm="test.example.com", > nonce="47ebe028cda119c35d4877b383027d28da013815" > > Content-Length: 0 > > > > > ----------------------------------------------- 2014-07-12 03:20:04.762536 > UDP message received [695] bytes : > > REGISTER sip:192.168.43.2 SIP/2.0 > > Via: SIP/2.0/UDP 192.168.43.8:5060 > ;rport;branch=z9hG4bKPjf8efd01a32a64ddfbbec63aca7a7de13 > > Max-Forwards: 70 > > From: <sip:1000@192.168.43.2>;tag=c951e08fa39747a6acd4211c07d931b8 > > To: <sip:1000@192.168.43.2> > > Call-ID: c687ec6c8df3448cb3611419bb28a239 > > CSeq: 30666 REGISTER > > User-Agent: MicroSIP/3.3.27 > > Contact: <sip:1000@192.168.43.8:5060;ob> > > Expires: 300 > > Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, INFO, SUBSCRIBE, NOTIFY, > REFER, MESSAGE, OPTIONS > > Authorization: Digest username="1000", realm="test.example.com", > nonce="47ebe028cda119c35d4877b383027d28da013815", uri="sip:192.168.43.2", > response="27e1e2e510251e2278c5747972cc00e5" > > Content-Length: 0 > > > > > ----------------------------------------------- 2014-07-12 03:20:04.762834 > UDP message sent (356 bytes): > > SIP/2.0 200 OK > > Via: SIP/2.0/UDP 192.168.43.8:5060 > ;rport;branch=z9hG4bKPjf8efd01a32a64ddfbbec63aca7a7de13 > > From: <sip:1000@192.168.43.2>;tag=c951e08fa39747a6acd4211c07d931b8 > > To: <sip:1000@192.168.43.2>;tag=1 > > Call-ID: c687ec6c8df3448cb3611419bb28a239 > > CSeq: 30666 REGISTER > > Contact: <sip:127.0.1.1:5060;transport=UDP> > > Content-Length: 0 > > Expires: 3600 > > > > > Best Regards, > Sakharam Thorat. > > > ------------------------------ > Date: Fri, 11 Jul 2014 16:47:07 +1200 > Subject: Re: [Sipp-users] verifyauth consistently reporting false > From: idk...@si... > To: sak...@ou... > CC: sip...@li... > > > Thanks Sakharam, > I checked out the links, I am well familiar with the site but could not > see anything to assist me further on this occasion > > Thanks > > Paul > > > > On Thu, Jul 10, 2014 at 12:42 AM, Sakharam Thorat < > sak...@ou...> wrote: > > Following links may be helpful > > tomeko.net/other/sipp/scenarios/REGISTER_client.xml > > tomeko.net/other/sipp/sipp_cheatsheet.php?lang=pl > > > Best regards, > Sakharam Thorat > > --- Original Message --- > > From: "Paul Miller" <idk...@si...> > Sent: July 9, 2014 2:54 PM > To: sip...@li... > Subject: [Sipp-users] verifyauth consistently reporting false > > Hi all, > To try and find a successful baseline that shows me that verifyauth is > working correctly I gave the instructions at > http://www.bertera.it/index.php/2013/05/30/uas-authenticating-registrar-sipp-scenario/ > a shot. The outcome was it too always show false. > so has anyone got a sipp scenario that is known to work that I can use to > troubleshoot why it does not work for me? > > Thanks > > Paul > > > > |