[Serial-pci-info] Redundant entries in serial pci_table.

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

dmesg asked that I send you this report.  I'm having a rough time getting
my modem up and running.  The modem is physically labelled as a 3Com/USR
3CP2977-OEM, but /proc/pci reports "US Robotics/3Com 56K FaxModem Model
5610 (rev 1)."

It's on a Abit KX7-333 with both on-board serial ports disabled in the bios.

Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (12b9,1008,12b9,00a2)
and the manufacturer and name of serial board or modem board

******************************************
00:00.0 Host bridge: VIA Technologies, Inc. VT8367 [KT266]
	Control: I/O-
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at e0000000
(32-bit, prefetchable) [size=64M]
	Capabilities: <available only to
root>

00:01.0 PCI bridge: VIA Technologies, Inc. VT8367 [KT266 AGP]
(prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle-
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz+
UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR-
<PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01,
sec-latency=0
	Memory behind bridge: e6000000-e8ffffff
	Prefetchable memory
behind bridge: e4000000-e5ffffff
	BridgeCtl: Parity- SERR- NoISA+ VGA+
MAbort- >Reset- FastB2B-
	Capabilities: <available only to root>

00:08.0
FireWire (IEEE 1394): Texas Instruments: Unknown device 8020 (prog-if 10
[OHCI])
	Subsystem: Procomp Informatics Ltd: Unknown device 8010
	Control:
I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (750ns min, 1000ns max), cache
line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at
ea005000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at ea000000
(32-bit, non-prefetchable) [size=16K]
	Capabilities: <available only to
root>

00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1
(rev 07)
	Subsystem: Creative Labs: Unknown device 8064
	Control: I/O+ Mem-
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin
A routed to IRQ 5
	Region 0: I/O ports at d000 [size=32]
	Capabilities:
<available only to root>

00:09.1 Input device controller: Creative Labs SB
Live! (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Control: I/O+
Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at d400
[size=8]
	Capabilities: <available only to root>

00:0b.0 Ethernet
controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100
(rev 11)
	Subsystem: Linksys: Unknown device 0574
	Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 32 (16000ns min, 32000ns max), cache line
size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at d800
[size=256]
	Region 1: Memory at ea004000 (32-bit, non-prefetchable)
[size=1K]
	Expansion ROM at <unassigned> [disabled] [size=128K]

Capabilities: <available only to root>

00:0f.0 Serial controller: US
Robotics/3Com 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])

Subsystem: US Robotics/3Com USR 56k Internal FAX Modem (Model 2977)

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A
routed to IRQ 3
	Region 0: I/O ports at dc00 [size=8]
	Capabilities:
<available only to root>

00:11.0 ISA bridge: VIA Technologies, Inc.:
Unknown device 3147
	Subsystem: VIA Technologies, Inc.: Unknown device
3147
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr-
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

Capabilities: <available only to root>

00:11.1 IDE interface: VIA
Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])

Subsystem: VIA Technologies, Inc. Bus Master IDE
	Control: I/O+ Mem+
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 0

Region 4: I/O ports at e000 [size=16]
	Capabilities: <available only to
root>

00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 23)
(prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+
Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, cache line size 08

Interrupt: pin D routed to IRQ 10
	Region 4: I/O ports at e400 [size=32]

Capabilities: <available only to root>

00:11.3 USB Controller: VIA
Technologies, Inc. UHCI USB (rev 23) (prog-if 00 [UHCI])
	Subsystem:
Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF-
FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32, cache line size 08
	Interrupt: pin D routed to IRQ 10
	Region
4: I/O ports at e800 [size=32]
	Capabilities: <available only to
root>

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550
AGP (rev 01) (prog-if 00 [VGA])
	Subsystem: Matrox Graphics, Inc.
Millennium G550 Dual Head DDR 32Mb
	Control: I/O+ Mem+ BusMaster+
SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status:
Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR-
	Latency: 32 (4000ns min, 8000ns max), cache line size 08

Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e4000000 (32-bit,
prefetchable) [size=32M]
	Region 1: Memory at e6000000 (32-bit,
non-prefetchable) [size=16K]
	Region 2: Memory at e7000000 (32-bit,
non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled]
[size=128K]
	Capabilities: <available only to
root>
************************************

-- 
paul boin
intertech
pb...@in...
717-382-9711