[seq24-users] Midi bindings for Queue can be enabled, but not disabled

[<tyr...@fr...>]

Hello,

I'm experiencing some problem with mode QUEUE and midi bindings. Actually, what
I want is to open the Mode Queue mode, then select my sequence/group of
sequences, then close the Queue Mode.
I'm using program changes to control it.
So I've tried different approaches :
1. toggle (the left brackets column of the .seq24rc file) : it simply doesn't
work at all. Nor the mode queue on neither the off
2. mode on + off (center and right brackets of the .seq24rc file) : I can enable
the mode queue, it works, but I cannot disable it with the off binding (as it's
program change, I cannot bind the same controller with different value, it has
to be two separate program changes). The only solution to get out of queue mode
is to press the Ctrl key one or two times, so that the key binding tell seq24
the queue is over.
Did someone experience the same problem? How can it be fixed?


Note: I've merked that using both control change + other midi controls (note on,
program changes) in seq24 works not very well. I've not had the time to go
further, but, basically, when pressing the control change button, the action to
which it is bind is done, and then you cannot do anything more with MIDI.

Thanks a lot.
Aurélien