RE: [Sdcc-user] ASxxxx

[Dafni & R. B. <da...@ho...>]

Hi all,

Thanks Gernot, I converted all the code to small letters and asx8051 is able
to assemble it now.

There are some minor problems with the .lst file.

The opcode for ajmp  0x0296 is shown as 0x0296 in the .lst file, but it
should be 0x4196.
The opcode for acall 0x01B5 is shown as 0x01B5 in the .lst file, but it
should be 0x21B5.

... but the .ihx file is O.K.

I converted both .ihx files to bin files and they are identical.

Sorry, for bothering you.

BTW: The Mon8051.asm file is working with Noice - I checked it and as always
attached it.

To build it:

type:

make
make link

regards,

Robert

> -----Original Message-----
> From: sdc...@li...
> [mailto:sdc...@li...]On Behalf Of Gernot.Fink
> Sent: Dienstag, 29. August 2000 19:21
> To: sdcc-user mailing list
> Subject: Re: [Sdcc-user] ASxxxx
>
>
>
>
> It loock like asxxx is case sensitive.
>
> LJMP will not work
> ljmp works.
>
>
> >
> >I was able to assemble the code o n l y with this version of
> asxxxx and it
> >is at least more or less the same as with PseudoSam (PseudoSam
> believes that
> >PCON is on 0x97 and not on 0x87).
> >The linker which comes with SDCC also produces a different hex
> file from the
> >new one. (I have to check if this is really a problem).
> >
> _______________________________________________
> Sdcc-user mailing list
> Sdc...@li...
> http://lists.sourceforge.net/mailman/listinfo/sdcc-user