Re: [Sdcc-user] trouble installing sdcc (boost)

[Sergey B. <ser...@gm...>]

Hi,
Do $ apt-cache search texinfo
Select proper package and do $ apt-get install <package>

вс, 17 мая 2020 г., 15:46 Saurabh Bansode <sau...@gm...>:

> Hello,
> I am using Ubuntu 16.04, Installed boost via apt-get install
> libboost-system-dev, and then ran   ./configure --disable-pic14-port
> --disable-pic16-port as I was faced some issues with pic. The ./configure
> command runs successfully now.
>
> Then after running *make *command, I am getting the following error:
>
> /home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/missing: 81:
> /home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/missing: makeinfo: not
> found
> WARNING: 'makeinfo' is missing on your system.
>          You should only need it if you modified a '.texi' file, or
>          any other file indirectly affecting the aspect of the manual.
>          You might want to install the Texinfo package:
>          <http://www.gnu.org/software/texinfo/>
>          The spurious makeinfo call might also be the consequence of
>          using a buggy 'make' (AIX, DU, IRIX), in which case you might
>          want to install GNU make:
>          <http://www.gnu.org/software/make/>
> Makefile:472: recipe for target 'bfd.info' failed
> make[4]: *** [bfd.info] Error 127
> make[4]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd/doc'
> Making info in po
> make[4]: Entering directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd/po'
> make[4]: Nothing to be done for 'info'.
> make[4]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd/po'
> make[4]: Entering directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd'
> make[4]: Nothing to be done for 'info-am'.
> make[4]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd'
> Makefile:1748: recipe for target 'info-recursive' failed
> make[3]: *** [info-recursive] Error 1
> make[3]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils/bfd'
> Makefile:2692: recipe for target 'all-bfd' failed
> make[2]: *** [all-bfd] Error 2
> make[2]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils'
> Makefile:849: recipe for target 'all' failed
> make[1]: *** [all] Error 2
> make[1]: Leaving directory
> '/home/esim/Desktop/tmp/sdcc-4.0.0/support/sdbinutils'
> Makefile:162: recipe for target 'sdcc-sdbinutils' failed
> make: *** [sdcc-sdbinutils] Error 2
>
>
>
>
> On Sun, May 17, 2020 at 6:04 PM Philipp Klaus Krause <pk...@sp...> wrote:
>
>> Am 17.05.20 um 13:50 schrieb Saurabh Bansode:
>> > Hello,
>> > After running ./configure as the manual suggests, I faced the following
>> > error:
>> >
>> > /Configure: error: boost library not found
>> (boost/graph/adjacency_list.hpp)/
>> >
>> > After which i came across this post
>> > <https://sourceforge.net/p/sdcc/discussion/1865/thread/ce681ab6/>, and
>> > ran the following command but the same error still persists.:
>> > ./configure CPPFLAGS=-I/opt/local/include
>> >
>> > Any suggestions?
>> >
>>
>> Which OS? Do you have boost installed? If yes, where are the headers,
>> such as adjacency_list.hpp located?
>>
>> Philipp
>>
>>
>> _______________________________________________
>> Sdcc-user mailing list
>> Sdc...@li...
>> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>>
> _______________________________________________
> Sdcc-user mailing list
> Sdc...@li...
> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>