Re: [sdcc-devel] Permission to publish SDCC article

[Borut R. <bor...@si...>]

Sandeep's article "Anatomy of a Compiler A Retargetable ANSI-C 
Compiler", published in Circuit Cellar, issue 121, is now publicly 
available at:
http://www.circuitcellar.com/SA/Articles2/Dutta-121.pdf

Borut


---------- Forwarded message ----------
From: *Sean Donnelly* <sdo...@ci...>
Date: May 21, 2007 6:57 PM
Subject: RE: Permission to publish SDCC article
To: Borut Ražem <bor...@gm...>

Borut,

Sorry for the delay. It was unintentional. Below you’ll find the link to 
the posted article on our site. I ask that the PDF remain on our site. 
You may distribute the link as needed.

http://www.circuitcellar.com/archives/titledirectory/121to140.html 
<http://www.circuitcellar.com/archives/titledirectory/121to140.html>

Best Regards,

Sean

*From:* Borut Ražem [mailto:bor...@gm... 
<mailto:bor...@gm...>]
*Sent:* Monday, May 21, 2007 1:37 AM
*To:* Sean Donnelly
*Subject:* Re: Permission to publish SDCC article

Hello Sean,

after a month and a half the article is still not available. Is there 
any problem, do I have to do something more or am I just too impatient?

P.S.: I hope that my original post wasn't considered as a 1st April joke...

Sincerely yours,
Borut

On 4/2/07, *Borut Ražem* <bor...@gm... 
<mailto:bor...@gm...>> wrote:

Hello Sean,

thank you very much! It doesn't matter WHERE the article is published, 
but it matters that IT IS published. We will make a link on our Web site.

Best Regards,
Borut



On 4/2/07, *Sean Donnelly* <sea...@ci... 
<mailto:sea...@ci...>> wrote:

Hi Borut,

I understand the value to the community. Thank you for contacting Circuit
Cellar. In this case I will ask our web developer to post a PDF linked
through the particular Table of Contents for the issue where the article
appears. I would prefer that the Circuit Cellar article be maintained on
our site. Once the link is set up, I'll send the URL your way.

Best,

Sean Donnelly
Publisher
Circuit Cellar, Inc.
4 Park Street
Vernon, CT 06066
P: 860-875-2199
F: 860-871-0411
Mobile: 860-930-4326


-----Original Message-----
From: "Borut Ražem" < bor...@gm... <mailto:bor...@gm...>>
To: sea...@ci... 
<mailto:sea...@ci...>, cj...@ci... 
<mailto:cj...@ci...>,
je...@ci... <mailto:je...@ci...>
Cc: san...@co... <mailto:san...@co...>
Date: Sun, 1 Apr 2007 19:51:45 +0200
Subject: Permission to publish SDCC article

>  Dear Sirs,
>
>  I'm Borut Razem and I'm a member of SDCC (Small Device C Compiler, see
>  http://sdcc.sourceforge.net/) FOSS project development team since
>  2002. I'm addressing you in the name of SDCC developers with the
>  following
>  request:
>
>  Sandeep Dutta, the original author of SDCC, published the article
>  "Anatomy
>  of a Compiler A Retargetable ANSI-C Compiler" in Circuit Cellar, issue
>  121
>  from August 2000, page 30 (see
>  http://www.dtweed.com/circuitcellar/xduttasa.htm 
<http://www.dtweed.com/circuitcellar/xduttasa.htm>). As you can see the
>  SDCC
>  project is still alive and active. Sandeep's article is a quite
>  important
>  source of information about the compiler design and architecture for
>  SDCC
>  developers, but is very difficult to find the original copy of the
>  magazine,
>  specially due the fact that SDCC developers are spread all around the
>  world.
>
>  We are kindly asking you to give us the permission to publish the
>  article on
>  the SDCC web site. We will certainly indicate that the article was
>  published
>  with your courtesy (or whatever your requirements are).
>
>  Sandeep Dutta already agreed to put the article on the WEB. Here is a
>  his
>  statement:
>  "I have no objections to the Circuit Cellar article being on the Web
>  site ,
>  I wrote it back in the days when SDCC was not that well known , with
>  the
>  objective of
>  promoting the compiler. You are right you will need their permission as
>  well, I have
>  seen other projects with their CC articles so it might not be a
>  problem."
>
>  I've put him on CC, so he will receive this mail too.
>
>  But there is an other problem: we don't have the article in electronic
>  form.
>  We can scan it from the magazine, but there are several advertisements,
>  which probably shouldn't be published with the article. Is there any
>  possibility to get the article in electronic form from you?
>
>  Looking forward for positive response.
>
>  P.S.: I'm sending this mail to several addresses, since I don't know
>  which
>  is the appropriate one. If none of them is correct, please forward it
>  to the
>  person who has the authorization to give me the answer. Sorry to bother
>  you...
>
>  Sincerely yours,
>  Borut