[Sdcc-user] _sloc variables in MCS51 internal data memory area

[Roelof B. <Roe...@ke...>]

Somebody out there please help me!!!

The size of the MCS51 application I am busy coding forced me to select the
large memory model.
As a result all the function parameter and local variables are assigned to
the xdata memory area 
as expected. The problem I am experiencing is the assigning of various _sloc
variables to the 
internal data memory area, which have now exceeded the 128 bytes limit and
with a resulting
out_of_memory error condition. No matter what I try, I don't seem to find a
cure for this error condition.

Can somebody please supply me with information on:
1.) what these _sloc variables are?
2.) how to move the _sloc variables from the internal to external data
memory area?
3.) how to get rid of these _sloc variables if possible, or how/where to
find a solution around the above
     problem?

I sincerely hope that somebody can assist me, to whom I will be very
grateful.


Thank you so much.

Roelof Broodryk


*******************************************************************************************************
Disclaimer:  The information contained in this communication is confidential and may be legally privileged.  
It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it.  
Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited.  
If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer.  

Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message.  
Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt.  
This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person.
*******************************************************************************************************