Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

[Daniel S. <ma...@my...>]

Cress, Andrew R napsal(a):
> Hmmm.  It has to set all of the slot LEDs on a backplane when it sets
> any one of them, but it reads the current status first before changing
> the one indicated.
> 
> Can you send me the sgsafte.log with -x turned on for that case?  
> That should show what the last read status is for the slots.  
> 

Yes,
I do :

  ./sgsafte -x -d0 -f > /tmp/log


  ./sgsafte -x -d1 -f >> /tmp/log
./sgsafte -x -d0 -f >> /tmp/log







> Andy 
> 
> -----Original Message-----
> From: Daniel Smolik [mailto:ma...@my...] 
> Sent: Wednesday, March 14, 2007 3:57 PM
> Cc: Cress, Andrew R; scs...@li...
> Subject: Re: [Scsirastools-developers] New user (Fujitsu Sun drives)
> 
> Daniel Smolik napsal(a):
> 
>>Cress, Andrew R napsal(a):
>>
>>
>>>Dan,
>>>
>>>OK, I have posted to the SVN trunk an updated sgsafte.c with more
>>>sophisticated handling for >=2 HSBP proc devices like you have.
>>>Please see if this handles the disk fault LEDs better, and send me
> 
> the
> 
>>>debug log. 
>>
>>
>>Hi,
>>there is debug log now. Status of LEDs I can test tomorrow.
>>Displaying informations about disks and processor are now  excelent
> 
> :-)
> I today test LED on enclosure. Situation is better. I can switch  to 
> orange each led this is good. But if I turn on  LED1 and after this a 
> try turn on LED 2, LED 1 turn off and LED2 turn on. If I try turn on LED
> 
> 3 LED 2 turn off and LED 3 turn on. I cannot get all LEDs on.
> 
> 
> 			Regards
> 					Dan


-- 
Mydatex s r.o.
http://www.mydatex.cz
email: sm...@my...
mob: 604200362
tel: 226210085