Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

[Cress, A. R <and...@in...>]

Hmmm.  It has to set all of the slot LEDs on a backplane when it sets
any one of them, but it reads the current status first before changing
the one indicated.

Can you send me the sgsafte.log with -x turned on for that case? =20
That should show what the last read status is for the slots. =20

Andy=20

-----Original Message-----
From: Daniel Smolik [mailto:ma...@my...]=20
Sent: Wednesday, March 14, 2007 3:57 PM
Cc: Cress, Andrew R; scs...@li...
Subject: Re: [Scsirastools-developers] New user (Fujitsu Sun drives)

Daniel Smolik napsal(a):
> Cress, Andrew R napsal(a):
>=20
>> Dan,
>>
>> OK, I have posted to the SVN trunk an updated sgsafte.c with more
>> sophisticated handling for >=3D2 HSBP proc devices like you have.
>> Please see if this handles the disk fault LEDs better, and send me
the
>> debug log.=20
>=20
>=20
> Hi,
> there is debug log now. Status of LEDs I can test tomorrow.
> Displaying informations about disks and processor are now  excelent
:-)
I today test LED on enclosure. Situation is better. I can switch  to=20
orange each led this is good. But if I turn on  LED1 and after this a=20
try turn on LED 2, LED 1 turn off and LED2 turn on. If I try turn on LED

3 LED 2 turn off and LED 3 turn on. I cannot get all LEDs on.


			Regards
					Dan